What sizing dies are compatible with the Redding .283 Titanium Nitride Neck Sizing Bushing?

This bushing is fully compatible with all Redding Type S Bushing Style Neck Sizing Dies, Type S Full Length Sizing Dies, and Competition Neck Sizing Dies. It also fits standard bushing dies from other manufacturers that accept 1/2-inch outer diameter by 3/8-inch length bushings.

How do I calculate if the 0.283-inch size is correct for my specific rifle cartridge?

To properly determine if the 0.283-inch diameter is correct, measure the neck diameter of a loaded cartridge using a micrometer and subtract 0.001 to 0.002 inches to account for brass spring-back. Additionally, ensure your brass neck wall thickness does not vary by more than 0.002 inches; otherwise, case necks should be turned for uniformity or an alternate bushing size selected.

Does this reloading component require any Australian electrical or regulatory compliance certifications?

No. Because the Redding .283 Titanium Nitride Neck Sizing Bushing is a completely non-powered, mechanical reloading tool, standard Australian electrical certifications such as 240V compatibility, plug types, and SAA or RCM approvals are not applicable.

What are the advantages of the Titanium Nitride coating on this bushing during the sizing stroke?

The Titanium Nitride surface treatment provides a distinctive gold-coloured finish that significantly increases surface hardness and lubricity compared to standard heat-treated steel bushings. This reduced friction helps minimize drag on your brass case necks during the sizing operation.

Neck Sizing Bushing - Redding 76283

The Redding .283 Titanium Nitride Neck Sizing Bushing (MPN: 76283) is a precision metallic cartridge reloading component engineered for exact neck tension control. Designed for use in bushing-style reloading dies, it sizes cartridge case necks strictly to a 0.283-inch outer diameter without sizing the case body or overworking the brass. It features a heat-treated steel body coated in a gold-coloured Titanium Nitride (TiN) surface treatment, which increases surface hardness and lubricity to reduce friction during sizing. Built to self-centre inside standard bushing cavities, it freely aligns with the cartridge case axis during the press stroke to minimise neck runout.

Key Features

Precise Neck Sizing: Sizing case necks to a fixed 0.283-inch dimension allows handloaders to establish consistent bullet grip and optimal release characteristics.
Titanium Nitride Coating: Low-friction TiN surface treatment minimises drag and sizing resistance against the brass neck while enhancing wear resistance.
Self-Centering Floating Fit: Floats within compatible die cavities to automatically align with the case neck axis and maintain concentricity.
Universal Die Compatibility: Integrates seamlessly with all Redding Type S Neck Sizing Dies, Type S Full Length Dies, Competition Neck Sizing Dies, and standard 1/2-inch outer diameter bushing dies.

Specifications

Internal Diameter: 0.283 inches
Outer Diameter: 1/2 inch (approx. 12.7 mm)
Length: 3/8 inch (approx. 9.525 mm)
Material & Finish: Heat-treated steel with Titanium Nitride (TiN) coating
Product Type: Non-powered mechanical reloading component
Approximate Weight: 15–30 grams
Manufacturer Part Number: 76283

Who is the Redding .283 Titanium Nitride Neck Sizing Bushing for?

Benchrest precision handloaders — requires an exact 0.283-inch internal diameter to finely tune bullet-seating tension in 0.001-inch increments while reducing case work hardening.
F-Class and PRS competitors — utilizes the standard 1/2-inch outer diameter by 3/8-inch length format to fit standard Type S bushing dies for repeatable, uniform neck sizing across match brass.
Long-range hunters reloading 6.5mm cartridges — benefits from this Titanium Nitride neck sizing bushing when sizing brass with specific neck wall thicknesses to achieve consistent chambering and bullet retention across cartridges such as 6.5mm Creedmoor or 6.5 PRC.

Less suitable for: Handloaders processing brass lots where case neck wall thickness varies by more than 0.002 inches without prior neck-turning, who require alternative bushing sizes in matching 0.001-inch steps or dedicated neck-turning tools to establish uniform dimensions before sizing.

SKU	RD41814LP
Model #	76283
Brand	Redding
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Pro-shot 1ps-38-17 Stainless Steel Rifle Cleaning

$122.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Redding 49356 Carbide Size Button Kit .35 Calibre

$99.95

Redding 96020 G-rx Large 32 Oz High Density Polyet

$22.95

Rcbs R9803 Expander Decapping Unit 226 Calibre Ste

$37.95

Redding 74415 Small Base Body Die For 6.5mm 284 Wi

$127.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 76283 Neck Sizing Bushing Tin .283

Secure Payment Methods