What reloading dies are compatible with the Redding 76361 Titanium Nitride Neck Sizing Bushing?

The Redding 76361 bushing features a standard 1/2-inch outer diameter and 3/8-inch length, allowing it to freely fit and interchange across all Redding bushing-style dies including Type S and Competition series. It is also fully compatible with bushing-style reloading dies from brands such as Wilson, RCBS, and Hornady.

How do I calculate if the .361 inch sizing size is correct for my .338 caliber brass?

To determine if the 0.361 inch size is appropriate, take your measured loaded cartridge outside neck diameter and subtract your desired neck tension, which is typically 0.001 to 0.002 inches. This specific .361 inch bushing is primarily selected for larger diameter cartridges within the .338 caliber family, such as .338 Lapua Magnum or .338 Winchester Magnum, depending on your specific brass wall thickness.

What precautions should I take if my brass requires a large neck diameter reduction?

If your neck sizing operation requires a reduction greater than 0.008 to 0.010 inches, Redding recommends stepping down the sizing process across multiple bushings in incremental passes. Attempting too large of a reduction in a single pass can lead to case shoulder damage or neck distortion.

Does the Titanium Nitride coating eliminate the need for case neck lubrication during sizing?

No, even though the Titanium Nitride (TiN) surface treatment significantly increases surface hardness and lowers friction compared to standard steel bushings, Redding still recommends applying a light case neck lubrication during the sizing cycle to ensure optimal operation and extend brass life.

Redding Neck Sizing Bushing - Redding 76361

The Redding .361 Titanium Nitride Neck Sizing Bushing (MPN 76361) is a precision reloading component engineered to regulate cartridge case neck tension without overworking the brass. Built from heat-treated steel with a base core hardness of approximately Rc 60–62, it features a gold-coloured Titanium Nitride (TiN) surface coating that increases surface hardness and lowers friction during the sizing cycle. This bushing sizes only the outside diameter of the case neck, eliminating the need to pull an expander ball through the case mouth. It operates across standard bushing-style reloading dies, fitting all Redding Type S Bushing Neck Dies, Type S Full Length Dies, and Competition Neck Sizing Dies, as well as compatible Wilson, RCBS, and Hornady bushing dies.

Key Features

Precise Neck Tension Control: Sizes case necks to an exact inside diameter of 0.361 inches, supporting handloaders who adjust neck tension in 0.001-inch increments.
Titanium Nitride Coating: Lowers surface friction and increases wear resistance during case neck sizing cycles compared to standard steel bushings.
Concentricity and Brass Life: Eliminates expander ball pull-through to minimise brass work hardening and improve bullet-to-case concentricity.
Standard Interchangeability: Features an industry-standard 1/2-inch outer diameter and 3/8-inch length for cross-compatibility with major bushing-style die systems.
Mechanical Operation: Fully non-electric reloading tool designed for standard bench-mounted reloading presses.

Specifications

Manufacturer: Redding Reloading Equipment
Model / MPN: 76361
Inside Diameter (Sizing Dimension): 0.361 inches
Outer Diameter (O.D.): 1/2 inch (0.500 inches)
Length: 3/8 inch (0.375 inches)
Material: Heat-treated steel (Rc 60–62 core hardness) with Titanium Nitride (TiN) surface coating
Die Compatibility: Redding Type S Bushing Neck Dies, Type S Full Length Dies, Competition Neck Sizing Dies, and compatible Wilson, RCBS, and Hornady bushing dies

Who is the Redding .361 Titanium Nitride Neck Sizing Bushing for?

Precision long-range target shooters using .338 caliber family cartridges — requires an exact 0.361-inch inside diameter bushing to achieve consistent bullet grip and neck tension on large-diameter brass cases such as .338 Lapua Magnum, .338 Winchester Magnum, or .338 Norma Magnum.
Handloaders seeking improved bullet-to-case concentricity and extended brass life — relies on the 0.001-inch increment sizing capability and standard 1/2-inch outer diameter by 3/8-inch length format of this reloading neck sizing bushing to size necks without expander ball distortion.

Less suitable for: Reloading applications requiring case neck sizing reduction greater than 0.008 to 0.010 inches in a single pass, which require multiple intermediate step-down neck sizing bushings to prevent neck distortion and case shoulder damage.

SKU	RD41824LP
Model #	76361
Brand	Redding
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Pro-shot 1ps-38-17 Stainless Steel Rifle Cleaning

$122.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Redding 49356 Carbide Size Button Kit .35 Calibre

$99.95

Redding 96020 G-rx Large 32 Oz High Density Polyet

$22.95

Rcbs R9803 Expander Decapping Unit 226 Calibre Ste

$37.95

Redding 74415 Small Base Body Die For 6.5mm 284 Wi

$127.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 76361 Titanium Nitride Neck Sizing Bushing 0.361 In

Secure Payment Methods