What reloading press thread standard does the Redding 80107 220 Swift Die Set require?

The Redding 80107 die set utilizes the industry-standard 7/8"-14 thread, making it fully compatible with single-stage and turret reloading presses commonly used by Australian handloaders. Additionally, you will need a standard Shellholder #4 (Part #11004) or Competition Shellholder #11604, which are sold separately.

Does this die set include neck sizing bushings for adjusting neck tension?

No, this is a standard full-length die set containing a Full Length Sizing Die with a fixed expander button and a Bullet Seating Die with a built-in roll-crimp ring. If you require exacting control over neck tension and runout down to increments of 0.001" for long-range precision, you would be better suited to a Redding Type-S Bushing Full Length Die.

Are there any electrical compliance or SAA/RCM certifications required for using these dies in Australia?

No electrical compliance or SAA/RCM certifications are applicable to the Redding 80107. Because this is a purely mechanical, manually operated reloading tool, it does not require electrical power or plugs, allowing for safe setup on your bench in outback sheds or climate-controlled rooms alike.

What special precautions should be taken when full-length sizing 220 Swift bottleneck brass with this set?

Because bottleneck sizing generates significant friction, you must apply adequate external case lubrication—such as sizing wax or liquid lube—to every piece of brass before operating the sizing die. Attempting to resize cases without proper lubrication risks permanently sticking the steel case inside the die body.

220 Swift Die Set - Redding 80107

The Redding .220 Swift Full Length Die Set (MPN: 80107) is a precision 2-die reloading set engineered to restore fired bottleneck cartridge brass to factory SAAMI minimum chamber dimensions and seat projectiles with uniform alignment. Machined from high-grade alloy steel and heat-treated in atmospherically controlled furnaces, this set is built for reloading .220 Swift ammunition (0.224 in bullet diameter) used in bolt-action hunting and target rifles. It operates mechanically with industry-standard 7/8"-14 threaded single-stage and turret reloading presses.

Key Features

Full-Length Case Sizing: The included sizing die (Part #91107) deprimes spent primers, resizes the case body and shoulder, and expands the neck in a single stroke via the steel expander button (#39223) and decapping rod assembly (#34223).
Internal Bullet Alignment: The seating die (Part #92107) features an internal bullet guide and standard seat plug (#01083) to ensure straight bullet-to-case seating alignment.
Built-In Roll Crimp: The seating die incorporates an integrated roll-crimp ring to secure projectiles during assembly.
Durable Alloy Steel Construction: Precision-machined steel components provide wear resistance for high-volume reloading workflows.

Specifications

Calibre: .220 Swift
Compatible Bullet Diameter: 0.224 in
Thread Standard: 7/8"-14
Die Set Style: 2-Die Set (Full Length Sizing Die #91107, Seating Die #92107)
Required Shellholder: Redding Shellholder #4 (#11004) or Competition Shellholder #11604 (sold separately)
Packaged Weight: Approximately 0.5–0.6 kg
Power Requirement: Non-powered mechanical operation

Who is the Redding 220 Swift Full Length Die Set for?

Bolt-Action Rifle Hunters: Restores fired brass to factory SAAMI dimensions on standard 7/8"-14 threaded presses to ensure reliable cycling and chambering for .220 Swift rifles used in long-range varminting and pest eradication.
High-Velocity Handloaders: Provides complete full-length resizing, decapping, and bullet seating for 0.224 in diameter projectiles, delivering consistent cartridge dimensions for pest control handloads.

Less suitable for: Handloaders seeking micrometer-adjustable neck tension control in increments of 0.001", who require a bushing-style full length die or dedicated competition seating die, or shooters dedicated to single-rifle brass longevity where a neck-sizing die is preferred.

SKU	RD41854LP
Model #	80107
Brand	Redding
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Pro-shot 1ps-38-17 Stainless Steel Rifle Cleaning

$122.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Redding 77874 Type S Bushing Full Length Die 338 R

$210.95

Redding 77936 Type S Full Length Die 7mm Prc Bushi

$178.95

Redding 78415 Type S Die Set 6.5-284 Winchester 3-

$313.95

Redding 80106 Full Length Reloading Die Set 22-250

$154.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 80107 220 Swift Full Length Die Set 7/8-14 Thread

Secure Payment Methods