The Redding .270 Weatherby Magnum Full Length Die Set is a precision two-die reloading system designed to restore fired brass to SAAMI/C.I.P. factory chamber dimensions and seat projectiles to precise overall lengths. Machined from heat-treated alloy steel with hand-polished internal surfaces, this set includes a full-length sizing die with an integrated decapping rod assembly, expander button, decapping pin, and a standard bullet seating die with an integrated roll crimp. Built with industry-standard 7/8"-14 TPI threading, it mounts directly into standard single-stage, turret, or progressive reloading presses.

Key Features

• Full-Length Sizing & Decapping: The full-length sizing die resizes the case body, shoulder, and neck back to factory specifications while removing spent primers in a single stroke.
• Bullet Seating & Crimping: The included seating die seats 0.277-inch diameter projectiles to specific overall lengths and can apply a uniform roll crimp when adjusted.
• Alloy Steel Construction: Heat-treated steel bodies are hand-polished to reduce friction and brass galling during repeated reloading cycles.
• Standard Press Mounting: Uses standard 7/8"-14 threads and Redding lock rings for secure, repeatable installation in standard reloading presses.
• Included Accessories: Supplied in a dedicated storage box that doubles as a cartridge loading block, complete with a spare decapping pin and hex wrench.

Product Specifications

• Cartridge Compatibility: .270 Weatherby Magnum
• Compatible Bullet Diameter: 0.277 in
• Die Threading: 7/8"-14 TPI
• Shellholder Compatibility: Redding #6 Standard Shellholder (or #11606 Competition Shellholder)
• Material: Heat-treated alloy steel
• Package Weight: Approximately 0.5 to 0.6 kg

Who is the Redding 270 Wby Weatherby Magnum Full Length Die Set for?

• Hunters and sporting shooters handloading for .270 Weatherby Magnum bolt-action rifles — provides full-length resizing to factory tolerances and seats 0.277 in bullets to ensure consistent, snag-free cycling across field conditions.
• Reloaders needing reliable chambering in field environments — uses standard 7/8"-14 TPI die threading to size fired brass back to minimum chamber dimensions across a stroke capable of accommodating 3.25 to 3.34 in overall cartridge lengths.

Less suitable for: Handloaders seeking maximum brass life when reloading fired cases exclusively for a single rifle chamber, who should choose neck-only sizing dies, or target shooters requiring neck tension adjustments in 0.001-inch increments, who are better served by competition bushing dies.