Is this Redding 6.5x55 SE Neck Sizing Die compatible with standard Australian reloading presses?

Yes, the Redding 81132R features an industry-standard 7/8"-14 thread interface. It is fully compatible with all standard single-stage and progressive reloading presses commonly used by Australian handloaders.

Does this neck sizing die require any electrical compliance or SAA/RCM certification for use in Australia?

No, electrical compliance and SAA/RCM certifications are not applicable. This is a purely mechanical handloading tool that requires no 240V mains power, batteries, or electrical approvals to be operated legally in Australia.

Can I use the brass resized with this die in multiple different 6.5x55mm rifles?

No, this die is optimised specifically for bolt-action rifles where brass is fired and reloaded exclusively for the exact same rifle chamber. Neck-sized cases will typically chamber tightly or fail to feed if interchanged between different rifles or used in semi-automatic firearms.

At what point in the reloading lifecycle will I need to use a full-length sizing or body die with these cases?

After 3 to 5 firing cycles, depending on your load pressures, brass will eventually expand at the shoulder and body, resulting in stiff bolt closure. At this threshold, you will need to incorporate a Redding Body Die or Full-Length Sizing Die to push the shoulder back.

6.5x55 Neck Die - Redding 81132R

The Redding 6.5x55 SE Neck Sizing Die (Model 81132) is a precision handloading tool engineered to resize only the neck of fire-formed cartridge brass while keeping the case body and shoulder dimensions matched to a specific rifle chamber. Machined from heat-treated alloy steel with polished internal surfaces, this die prevents excessive cold-working and brass fatigue, extending case life and maintaining chamber-matched concentricity. It incorporates an integrated decapping rod assembly with a standard expander button to deprime spent primers and set inside neck dimensions in a single press stroke.

Key Features

Neck-Only Resizing: Sizes the neck area while leaving the fire-formed body and shoulder intact, maximising brass life and reducing case stretch.
Integrated Decapping Assembly: Deprimes spent primers and expands the neck internal diameter to correct seating dimensions during the sizing stroke.
Heat-Treated Steel Construction: Features precision-machined, polished internal surfaces to ensure uniform sizing and prevent brass galling.
Standard Thread Mounting: Built with an industry-standard 7/8"-14 thread to fit standard single-stage and progressive reloading presses.

Specifications

Calibre: 6.5x55mm Swedish Mauser (6.5x55 SE / SKAN / Krag)
Bullet Diameter: .264 in (6.50 mm)
Thread Interface: 7/8"-14
Weight: 0.3 kg (approx. 10.5 oz)
Material: Heat-treated, precision-machined alloy steel
Inclusions: Die body, decapping rod assembly with expander button, and lock ring

Who is the Redding 6.5x55 SE Neck Sizing Die for?

Precision bolt-action handloaders — requires maintaining exact fire-formed case dimensions for 6.5x55mm Swedish Mauser rifles, using this 6.5x55mm neck sizing reloading die to seat .264 in bullets without overworking the brass body.
Dedicated single-rifle brass reusers — relies on a 7/8"-14 thread compatible die weighing 0.3 kg that resizes only the neck of .264 in cartridges fired through the same individual chamber, preventing premature case head separation.

Less suitable for: Semi-automatic, pump-action, or lever-action firearms where cartridges require full-length resizing to feed reliably, as well as cases exceeding 3 to 5 firing cycles that experience stiff bolt closure; these conditions require a dedicated body die or a full-length sizing die.

SKU	RD41901LP
Model #	81132R
Brand	Redding
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Pro-shot 1ps-38-17 Stainless Steel Rifle Cleaning

$122.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Redding 81340 7x64 Brenneke Neck Sizing Die 7/8"-1

$175.95

Redding 78136 Type S Neck Die Set For 7mm Remingto

$302.95

Redding 81169r Neck Sizing Die 375 H&H Magnum Relo

$109.95

Redding Type S Elite Bushing Die Set 60443 6mm Cre

$664.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 81132r Neck Sizing Die 6.5x55 Se Swedish Mauser

Secure Payment Methods