Are these S&B 9mm brass cases supplied primed or unprimed, and what primer size do they require?

This product contains 50 pieces of virgin, unprimed brass cases featuring a standard Boxer-primed pocket. Handloaders will need to pair them with standard Small Pistol primers along with appropriate commercial decapping and priming tooling during your reloading process.

Can I use these Sellier & Bellot 9mm Luger cases in a firearm chambered for 9x21mm or 9mm Makarov?

No, these cases are strictly engineered for standard 9mm Luger (9x19mm Parabellum) chambers with a nominal case length of 19.15 mm. They are completely incompatible with 9x21mm, 9mm Browning Court, or 9mm Makarov firearms and should never be interchanged with those cartridges.

Do I need any special permits or licences to purchase unprimed brass cases in Australia?

In Australia, empty unprimed brass cases are classified as non-regulated inert reloading components at the federal level and do not require an explosives transport licence. However, customers must still comply with state-by-state firearms dealer and licensing regulations applicable to firearm components, such as holding the appropriate Category H licence.

Are these cases suitable for high-pressure IPSC Major power-factor loads?

While these cases handle standard C.I.P. and SAAMI service pressures up to 38,500 psi for +P loads, they are not recommended for high-volume IPSC Open division Major power-factor loads exceeding 42,000 psi. For those extreme pressures, handloaders typically transition to specialized heavier-web brass to prevent excessive case head expansion.

9mm Luger Brass Cases - Sellier & Bellot V316202

The Sellier & Bellot 9mm Luger Unprimed Brass Cases (50 Pack) provides handloaders with factory-drawn, virgin cartridge cases manufactured in the Czech Republic (MPN: V316202). Engineered strictly for firearms chambered in 9mm Luger (9×19mm Parabellum), these cases feature a standard Boxer primer pocket designed for Small Pistol primers (SPP). The brass undergoes factory annealing to balance case hardness with neck ductility, providing uniform neck tension and extended cycle life across repeated reloads. Cases are supplied unprimed and require standard case preparation, including full-length sizing and mouth flaring, before charging and seating.

Key Features

Factory Annealed Brass: Undergoes controlled annealing processes to achieve balanced material ductility, uniform neck tension, and prolonged reloading life.
Standard Boxer Primer Pockets: Machined with uniform dimensions to accept standard Small Pistol primers using conventional priming equipment.
Precision Case Geometry: Drawn to standard C.I.P. and SAAMI exterior dimensions with a nominal maximum case length of 19.15 mm and a base/rim diameter of 9.93 mm.
Standard Pressure Rating: Built to safely contain standard operating pressures up to 2,350 bar (34,083 psi) C.I.P. maximum average pressure and 35,000 psi standard SAAMI (38,500 psi +P).

Product Specifications

Brand: Sellier & Bellot (S&B)
Manufacturer Part Number (MPN): V316202
Calibre: 9mm Luger (9×19mm Parabellum)
Case Type: Unprimed drawn brass, Boxer pocket
Quantity: 50 pieces per pack
Nominal Maximum Case Length: 19.15 mm (0.754 in)
Nominal Rim/Base Diameter: 9.93 mm
Primer Compatibility: Small Pistol Primers (SPP)
Country of Manufacture: Czech Republic

Who is the Sellier & Bellot 9mm Luger Unprimed Brass 50 Pk for?

Competitive IPSC and USPSA handloaders — requires virgin 9mm Luger brass cases supplied in a 50-piece pack featuring standard Boxer primer pockets to develop uniform, sub-Major tournament loads within factory pressure envelopes.
Pistol Calibre Carbine competitors — relies on consistent 19.15 mm maximum length 9mm Luger unprimed brass cases to assemble high-volume ammunition that cycles reliably through semi-automatic carbine chambers.
Precision target shooters — uses controlled-hardness 9mm Luger virgin brass cases in 50-piece batches to achieve uniform bullet release and consistent headspace in service pistol and target disciplines.

Less suitable for: Handloaders operating high-volume IPSC Open division Major power-factor ammunition exceeding 42,000 psi, or firearms chambered in 9×21mm, 9mm Browning Court (.380 ACP), or 9mm Makarov; these applications require specialised heavy-web brass cases or cartridge-specific dimensions.

SKU	SAB42094LP
Model #	V316202
Brand	S&B
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Pro-shot 1ps-38-17 Stainless Steel Rifle Cleaning

$122.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Frankford Arsenal Hinge Lid Ammo Box 380 - 9mm 50

$11.95

Hornady A218 Lock N Load Perfectly Modified Case F

$19.95

Hornady Reloading Rifle Unprimed Brass Cases .338

$134.95

Hornady Reloading Rifle Unprimed Brass Cases 375 R

$160.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Sellier & Bellot V316202 Brass Cases 9mm Luger 50 Pack

Secure Payment Methods