Are these S&B 6mm Creedmoor cases equipped with Small or Large Rifle Primer pockets?

These S&B Sellier & Bellot 6mm Creedmoor brass cases feature standard Large Rifle Primer (LRP) pockets with a Boxer-primed design. This makes them fully compatible with standard large rifle primers and conventional depriming tooling.

Can I use these cases directly for 6.5mm Creedmoor or other short-action calibres without modification?

No, these cases are exclusively manufactured for 6mm Creedmoor and are not cross-compatible with 6.5mm Creedmoor, 6mm ARC, 6mm BR, or .243 Win without proper neck-expansion and resizing dies. Attempting to load them without proper preparation can result in chambering failures or dangerous over-pressure events.

What is the maximum pressure threshold I should adhere to when handloading this brass?

When developing custom loads with these cases, you must not exceed the maximum average pressure threshold of 62,000 psi as set by SAAMI standards. Staying within published maximum powder charges ensures case-head integrity and prevents premature pocket loosening.

Are there any specific firearms licensing requirements for purchasing unprimed brass in Australia?

As unprimed empty brass, this product contains no gunpowder, primers, or live explosives and is classified as a non-hazardous reloading component. However, depending on your specific state or territory in Australia, the purchase and sale of cartridge brass may still require the presentation of a valid firearms licence or compliance with local dealer recording regulations.

6mm Creedmoor Brass - Sellier & Bellot V337162

The Sellier & Bellot 6mm Creedmoor Unprimed Brass Cases (part number V337162) provide raw, unprimed metallic cartridge cases engineered for custom rifle ammunition reloading. Manufactured in Vlašim, Czech Republic, to European C.I.P. standards, these reloadable cases feature a standard Boxer-primed design and Large Rifle Primer (LRP) pocket. Built from cartridge-grade brass alloy, they serve as ductile, reloadable parent cases designed to withstand standard operating pressures for rifles chambered specifically in 6mm Creedmoor (6×48mm).

Standard Boxer Primer Pocket: Utilises a standard Large Rifle Primer (LRP) pocket with a standard Boxer flash hole to enable depriming and resizing on conventional reloading press dies.
C.I.P. Dimension Standardisation: Formed to strict European dimensional tolerances with a nominal case length of 1.920 in (48.77 mm) to match standard 6mm Creedmoor chambers.
Cartridge-Grade Alloy: Drawn from ductile brass alloy to deliver case life across repeated firing, neck-sizing, and full-length sizing cycles.
Inert Reloading Component: Unprimed and non-energetic, containing no live primers or propellant powders.

Specifications

Brand: Sellier & Bellot
Product Number: V337162
Calibre: 6mm Creedmoor (6×48mm)
Component Type: Unprimed, reloadable rifle brass cases
Pack Quantity: 20 pieces
Primer Pocket Type: Large Rifle Primer (LRP), Boxer
Nominal Case Length: 1.920 in / 48.77 mm
Base Diameter: 0.470 in / 11.95 mm
Rim Diameter: 0.473 in / 12.01 mm
Compatible Projectile Diameter: .243 in / 6mm
Maximum Average Pressure Threshold: 62,000 psi (SAAMI) / 4,350 bar (C.I.P.)

Who is the Sellier & Bellot 6mm Creedmoor Unprimed Brass Cases 20 Pack for?

Precision rifle competition shooters — requires a uniform 1.920 in (48.77 mm) nominal case length in a 6mm Creedmoor reloadable brass case to support precision handloads deployed across long-range engagements from 100 m out to 1,000+ m.
Hunters assembling custom rifle cartridges — relies on standard Large Rifle Primer (LRP) pockets to assemble tailored 6mm Creedmoor hunting loads built around specific .243 in terminal projectiles.
High-volume shooters developing practice loads — provides a cost-effective, factory-drawn 20 pieces per pack quantity of reloadable brass cases to establish baseline powder charges and projectile seating depths without expending premium match brass.

Less suitable for: Loaders assembling ammunition for 6.5mm Creedmoor firearms without using neck-expansion dies, or those developing high-pressure loads operating beyond the maximum average pressure threshold of 62,000 psi (SAAMI) / 4,350 bar (C.I.P.); these applications require factory-formed 6.5mm Creedmoor brass or dedicated heavy-duty small-primer-pocket brass engineered for extreme multi-cycle pressures.

SKU	SAB42174LP
Model #	V337162
Brand	S&B
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Pro-shot 1ps-38-17 Stainless Steel Rifle Cleaning

$122.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Sellier & Bellot V337332 Brass Cases 7x57 Mauser 2

$25.95

Hornady Reloading Rifle Unprimed Brass Cases .338

$134.95

Hornady Reloading Rifle Unprimed Brass Cases 375 R

$160.95

Sellier & Bellot V337122 Brass Cases 5.6x52r 20 Pa

$32.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Sellier & Bellot V337162 Brass Cases 6mm Creedmoor 20 Pack

Secure Payment Methods