Warthog Whciisf Classic Ii Diamond Stones Fine 1000 Grit
Secure Payment Methods
Calculate Shipping
The Warthog Classic II Diamond Stones Fine (Model: WHCIISF / C2SF) are factory replacement hones engineered exclusively for the Warthog V-Sharp Classic II and V-Sharp A4 guided manual knife sharpeners. Featuring a double-sided configuration, each hone integrates a 1000-grit Fine diamond abrasive surface on one face and a smooth steel finishing rod on the reverse. This mechanical accessory snaps directly into the host frame's spring-loaded guide arms to perform precise micro-bevel refinement and edge alignment across preset sharpening angles of 20°, 25°, and 30° without removing excessive blade steel.
Key Features
- Dual-Action Honing: Combines a 1000-grit diamond abrasive for final-stage edge sharpening with an integrated smooth steel rod on the reverse side for blade alignment.
- Guided Angle Consistency: Operates within the spring-loaded guide arms of compatible Warthog sharpeners to maintain precise bevel control simultaneously across both sides of the blade.
- Unpowered Mechanical Operation: Requires no 240V mains power, batteries, or electrical certifications, functioning as a fully manual abrasive accessory.
- Dedicated Compatibility: Designed specifically for V-Sharp Classic II and V-Sharp A4 units (incompatible with Curve, Multi-Edge, or XE series).
Specifications
- Product Model: WHCIISF / C2SF
- Abrasive Grade: 1000-grit Fine diamond
- Hone Type: Double-sided (diamond abrasive face / smooth steel rod face)
- Sharpener Compatibility: Warthog V-Sharp Classic II and V-Sharp A4
- Angle Settings Supported: Preset 20°, 25°, and 30° angles on the host Classic II frame
- Packaged Weight: Approximately 50–70 g (pair)
- Bar Dimensions: Not published by the manufacturer
Who is the Warthog Classic II Diamond Stones Fine for?
- Hunters and field dressers — maintaining skinning, processing, and field blades at host frame angles of 20°, 25°, or 30° using 1000-grit diamond replacement stones to refine the cutting edge without grinding away vital blade steel.
- Home cooks and butchers — performing routine edge touch-ups on standard kitchen knives with a 1000-grit fine diamond surface that snaps directly into existing guided V-Sharp frames.
- Warthog Classic II and A4 sharpener owners — replacing worn standard hones with a lightweight 50–70 g pair of dedicated double-sided 1000-grit diamond and steel assemblies.
Less suitable for: Blades with chipped, damaged, or heavily blunted edges requiring coarse steel removal rather than fine 1000-grit honing (a coarser 270-grit or 325-grit abrasive hone is required), as well as fully serrated, chisel-ground, or convex-ground blades that cannot interface with the V-system (individual tapered diamond rods or flat benchstones are required).
| SKU | WHG40399LP |
| Model # | WHCIISF |
| Brand | Warthog |
| Shipping Weight | 1.0000kg |