Warthog Whciism Classic Ii Diamond Stones 600 Grit Medium
Secure Payment Methods
Calculate Shipping
The Warthog V-Sharp Classic II Medium Diamond Replacement Hones (WHCIISM) provide controlled edge maintenance and refining for double-bevel blades. Engineered as a set of two 4.75 in (120.65 mm) snap-in rods, each hone features a dual-sided design comprising a 600-grit medium diamond abrasive surface on one side and a smooth finishing steel on the reverse. This manual replacement set allows users to sharpen and refine primary bevels while removing minimal steel, then de-burr and align the micro-bevel without switching out hardware.
Key Features
- Dual-Action Design: Combines a 600-grit medium diamond abrasive face for bevel sharpening with a reverse-side smooth steel for de-burring and micro-bevel alignment.
- Controlled Material Removal: The medium 600-grit diamond surface refines cutting edges with minimal metal loss, preserving blade life during regular resharpening.
- Snap-In Installation: Sized at 4.75 in (120.65 mm) for direct snap-in replacement into compatible sharpening frames.
- Manual Operation: Operates entirely mechanically without electrical power requirements, suitable for wet or dry edge maintenance.
Product Specifications
- Product Model: WHCIISM / WHSC2SM
- Abrasive Grit: 600 Grit Medium Diamond
- Quantity: Set of two (2) double-sided replacement rods
- Overall Length: 4.75 in (120.65 mm)
- Packaged Weight: Approximately 1.0 lb (~0.45 kg)
- Power Requirements: None (manual/mechanical)
- System Compatibility: Warthog V-Sharp Classic II and V-Sharp A4 sharpeners exclusively (not compatible with Curve or Xtreme Edge models)
- Blade Compatibility: Standard straight-edge, double-bevel knives (hunting, pocket, culinary, boning, and fillet blades)
Who is the Warthog Classic II Medium Diamond Stones for?
- Hunters and Field Processors — who require regular edge refinement on field dressing and butchering knives using a 600-grit medium diamond replacement stone that cleans up working edges without stripping excessive steel.
- Home Cooks and Culinary Enthusiasts — maintaining kitchen cutlery with a 4.75 in (120.65 mm) double-sided knife sharpener replacement stone that sharpens on a 600-grit diamond surface and de-burrs on an integrated steel face.
- Warthog Classic II and A4 Sharpeners Owners — needing direct-fit maintenance rods engineered precisely to 4.75 in (120.65 mm) overall length to restore the factory sharpening capability of their manual system.
Less suitable for: Blades requiring severe edge chip repair or major bevel reprofiling, which require a coarser 270-grit or 325-grit replacement stone, or for users seeking a mirror-polished push-cut finish, who require a 1000-grit fine diamond stone or ceramic hone; also unsuitable for single-bevel grinds and serrated blades without dedicated accessory attachments.
| SKU | WHG40400LP |
| Model # | WHCIISM |
| Brand | Warthog |
| Shipping Weight | 1.0000kg |