Warthog Whlstrop Leather Strop Honing Tool 220 Mm
Secure Payment Methods
Calculate Shipping
The Warthog Leather Strop (MPN: ME36 / SKU: WHLSTROP) is a dedicated finishing accessory designed to deburr and polish knife edges following primary sharpening stages. Built with a slide-on format compatible with the Warthog Multi Edge guided sharpening system, this manual tool features a natural leather surface that refines micro-burrs and creates a mirror-polished edge on outdoor, hunting, pocket, and culinary blades. It operates across the Multi Edge system's full 10° to 90° angle adjustment range and can also be utilised as a standalone flat hone for manual benchtop touch-ups.
Key Features
- Slide-On Multi Edge Compatibility: Designed specifically to slide onto the Warthog Multi Edge plate carrier for guided, consistent-angle deburring.
- Micro-Burr Removal: The natural leather surface eliminates fine wire edges and micro-burrs left behind after grinding with diamond plates.
- Standalone Usability: Functions both on the Multi Edge guided station and as a traditional flat lapping pad for freehand blade maintenance.
- Manual Operation: Requires no electrical power, making it fully portable for workshop and field kit maintenance.
Product Specifications
- Product Type: Guided system leather strop / lapping pad
- Manufacturer MPN: ME36
- Distributor SKU: WHLSTROP
- Length: 220 mm
- Width: 50 mm
- System Compatibility: Warthog Multi Edge Sharpener (operates from 10° to 90°)
- System Exclusions: Incompatible with V-Sharp Classic II and V-Sharp Curve guide arms
- Operation: Manual
Who is the Warthog Leather Strop for?
- Hunters and outdoor enthusiasts — requires guided finishing across bevels between 10 degrees and 90 degrees using the Warthog Multi Edge system to maintain field knives between stone-sharpening sessions.
- Sharpening hobbyists — relies on the 220 mm by 50 mm leather surface of this guided system leather strop to deburr and polish pocket and culinary edges to a fine mirror finish after progression through diamond stones.
Less suitable for: Blades with chipped, rolled, or heavily blunted edges; edges in this condition require a coarse-to-medium abrasive hone of 270 to 325 grit to reset the bevel profile before stropping. Additionally, it is incompatible with proprietary slotted hone arms such as the V-Sharp Classic II and V-Sharp Curve systems.
| SKU | WHG40403LP |
| Model # | WHLSTROP |
| Brand | Warthog |
| Shipping Weight | 1.0000kg |