Warthog Whxtsmf Xtreme Edge Diamond Stones Medium Fine 600 1000 Grit
Secure Payment Methods
Calculate Shipping
The Warthog Xtreme Edge Diamond Stones Medium / Fine (WHXTSMF) are a pair of dual-sided replacement hone rods engineered exclusively for the Warthog V-Sharp Xtreme Edge manual sharpener. Unlike standard single-grit hones, each rod in this set features high-grade natural diamond abrasive surfaces on both sides, combining a 600-grit medium face with a 1000-grit fine reverse face. Measuring 3 3/4 inches (95.25 mm) in length, these rods restore working edges and polish micro-bevels on hard cutlery steels without the need for water baths or honing oils.
Key Features
- Dual-Sided Diamond Surfaces: Integrates a 600-grit medium diamond hone for edge maintenance and a 1000-grit fine diamond hone for razor-edge polishing on the reverse side of each rod.
- Dry Sharpening Operation: Employs natural diamond coatings that abrade modern knife steels efficiently without requiring lubricating oils or water.
- Dedicated Hardware Fitment: Sized specifically at 3 3/4 inches (95.25 mm) to fit the rod carriers of the V-Sharp Xtreme Edge frame.
- Two-Piece Set: Supplied as a complete pair of 2 replacement hones to equip both sides of the V-Sharp sharpening mechanism simultaneously.
Product Specifications
- Product Name: Warthog Xtreme Edge Diamond Stones Medium / Fine
- Model / SKU: WHXTSMF
- Abrasive Type: Natural diamond coating
- Grit Ratings: 600 grit (Medium) / 1000 grit (Fine) dual-sided
- Quantity: Set of 2 hone rods
- Length: 3 3/4 inches (95.25 mm) per rod
- Estimated Pair Weight: ~50–80 g
- System Compatibility: Warthog V-Sharp Xtreme Edge manual sharpener only (not compatible with Classic II, A4, or Curve models)
- Power Requirements: None (manual operation)
Who is the Warthog Xtreme Edge Diamond Stones Medium / Fine for?
- Hunters and Field Processors — Need field-maintainable sharpening stones capable of deburring and refining skinning and gutting blades using dual 600-grit medium and 1000-grit fine diamond surfaces without carrying honing oils.
- Warthog V-Sharp Xtreme Edge Owners — Require factory replacement diamond sharpening stones built precisely to the 3 3/4-inch length required to fit the mechanical guide carriers of their specific sharpener frame.
Less suitable for: Blades with chipped, rolled, or heavily damaged edges requiring complete re-profiling, which exceed the material removal rate of 600-grit surfaces and require coarser 270-grit or 325-grit sharpening stones, bench stones, or guided rod systems.
| SKU | WHG40407LP |
| Model # | WHXTSMF |
| Brand | Warthog |
| Shipping Weight | 1.0000kg |