The Hawke Reach Forward Mount Weaver 1" 2" Reach (MPN 22125) is a two-piece cantilever scope ring system designed to optimize eye relief and optic placement on rifles with limited receiver rail space. Precision-machined from high-grade aluminium and finished in matte black anodizing, this mount incorporates an integrated 2-inch (50 mm) forward or rearward offset. This reach-forward design enables shooters to bridge wider distances across receiver gaps, clear bulky central turret saddles, and establish correct eye alignment without compromising ring spacing on standard Weaver or Picatinny bases.

Key Features

• 2-Inch Cantilever Extension: Features a 2-inch (50 mm) offset ring design that extends scope mounting placement forward or backward beyond standard rail slots.
• Internal Cushion Tape: Ring surfaces are lined with internal fabric cushion tape to prevent optic tube pinching, marring, or scratching under recoil.
• Double Hex Screw Clamping: Utilizes four top hex screws per ring cap to ensure consistent, secure clamping tension across the optic body.
• High Height Profile: Provides elevated receiver clearance to accommodate medium-to-large scope objective lenses up to 50 mm or larger depending on barrel profile.
• Weaver & Picatinny Compatibility: Crossbar interface mounts securely to standard Weaver-pattern rails and standard Picatinny systems.

Specifications

• Model Number (MPN): 22125
• Ring Diameter: 1 inch (25.4 mm)
• Extension Reach: 2 inches (50 mm)
• Height Profile: High
• Mount Interface: Weaver / Picatinny
• Configuration: 2-piece ring set
• Material: Precision-machined aluminium
• Finish: Matte black anodized
• Weight: Approximately 79 g to 85 g (2.8 oz to 3.0 oz)
• Ring Cap Fasteners: Double hex screw configuration (4 screws per ring)

Who is the Hawke Reach Forward Mount Weaver 1" 2" Reach for?

• Hunters and target shooters mounting 1-inch optics with oversized central saddles: Requires a cantilever scope ring mount with a 1-inch (25.4 mm) ring diameter and a 2-inch extension to bridge wide turret housings or large side-focus wheels without binding on the rail.
• Shooters needing eye relief correction on compact or split-bridge receivers: Delivers a 2-inch (50 mm) cantilever offset to position standard 1-inch scopes further forward or rearward when receiver mounting slots are restricted.

Less suitable for: Riflescopes with 30 mm main tubes, which require dedicated 30 mm cantilever mounts, or rifles with 9–11mm and 3/8-inch rimfire/airgun dovetails, which require 11mm dovetail-specific extension rings.