The Hawke Match Mount 2-Piece Reach Forward 30mm Weaver High (Model 22127) is a precision-machined cantilever scope ring set engineered to resolve eye-relief and optic placement limitations. Built from high-grade anodized aluminium with a matte black finish, this mounting system provides a 2-inch (50 mm) forward or rearward offset. It allows shooters to achieve correct optical alignment on firearms and air rifles with compact mounting platforms or oversized turret assemblies while attaching directly to standard Weaver and MIL-STD-1913 Picatinny rails.

Key Features

• 2-Inch Cantilever Extension: Provides a 50 mm forward or rearward offset to position optics correctly on short rails or action configurations.
• Internal Cushion Tape: Integrated synthetic tape lines the inner ring surfaces alongside rounded edges to prevent marring, pinching, or scratching of the 30 mm optic tube.
• Secure Cap Clamping: Utilises double hex screws per ring cap (3 mm hex drive) for uniform tension across the scope body.
• Recoil Crossbar Interface: Features an integrated base crossbar that locks into Weaver and Picatinny rail slots to prevent longitudinal movement during recoil.
• Turret and Saddle Clearance: The high-profile layout accommodates 30 mm scopes equipped with large central saddle housings, target turrets, or side-focus parallax wheels.

Product Specifications

• Ring Diameter: 30 mm
• Extension / Reach: 2 inches (50 mm cantilever)
• Profile Height: High
• Mount Interface: Weaver / MIL-STD-1913 Picatinny rail
• Configuration: 2-piece reach-forward match mount
• Material: High-grade anodized aluminium
• Finish: Matte Black
• Fasteners: Double hex screws (3 mm hex drive) per cap

Who is the Hawke Reach Forward Mount Weaver 30mm 2" Reach for?

• PCP Air Rifle Shooters — Provides a 2-inch (50 mm) cantilever extension to position 30 mm scopes with long eye-relief requirements comfortably forward on compact airgun actions.
• Bullpup and Short-Rail Rifle Owners — Delivers a 50 mm forward reach on Weaver or Picatinny bases where limited receiver rail length otherwise prevents establishing correct optical eye relief with 30 mm main tube optics.

Less suitable for: Riflescopes with 1-inch (25.4 mm) or 34 mm main tubes, which require rings matched specifically to their tube diameter, or shooting setups that need standard vertical ring alignment or less than 2 inches of offset, where a standard non-cantilever ring set or a 1-inch extension mount is better suited.