Will these low-profile 34mm rings clear a large objective lens on my heavy-recoil centrefire rifle?

Because these are Low-height rings with an overall unit height of 53 mm, they are ideally suited for smaller objective scopes or rifles featuring standard sporter barrel profiles. Scopes with large objective bells ranging from 50 mm to 56 mm will often foul against the rifle barrel or receiver when paired with low rings, so you may need to step up to Hawke Medium or High mounts if you are running a heavy bull barrel.

Are these steel rings capable of handling heavy-recoil magnum calibres in outback hunting conditions?

Yes, the Hawke Precision Steel Ring Mounts are engineered from solid high-tensile steel to deliver maximum structural rigidity and zero retention under heavy kinetic impulse. They are fully rated for heavy-recoil centrefire rifles and magnum calibres commonly used across harsh Australian hunting environments.

What type of rails and scope main tubes are compatible with the Hawke Model 23020 rings?

This specific model is exclusively compatible with 34 mm main tube optics and mounts directly to standard Weaver or Picatinny rails via a 1/2-inch hex nut. They will not fit 1-inch or 30 mm optic tubes, nor are they compatible with traditional European 9-11 mm or 3/8-inch dovetail rails without an intermediate adapter base.

Do I need any special permits or electrical compliance certifications to purchase these scope rings in Australia?

No permits or electrical certifications are required. As a fully mechanical firearm accessory containing no electronic circuitry or internal battery systems, SAA or RCM electrical compliance is not applicable, and the rings can be sold freely across Australia as non-restricted shooting hardware.

34mm Scope Rings - Hawke 23020

The Hawke Precision Steel Ring Mounts 34mm 2-Piece Weaver Low (Hex Nut) are heavy-duty firearm mounting accessories engineered to clamp 34 mm main tube riflescopes to standard Weaver and Picatinny rails. Manufactured from solid high-tensile steel with a matte black finish, this two-piece mounting system provides structural rigidity and recoil resistance for heavy-recoil centrefire and magnum platforms. The low-profile configuration positions the optic close to the rifle receiver, establishing an overall unit height of 53 mm (2.1 in) to support natural cheek alignment on traditional comb profiles.

Key Features

Solid Steel Construction: Machined from solid high-tensile steel to resist heavy recoil forces and maintain zero stability under severe kinetic impulse.
Low-Profile Design: Drops the optic centerline closer to the bore axis, lowering overall unit height to 53 mm (2.1 in).
Torx Cap Screws: Utilises double Torx T15 cap screws per ring with a 6-48 thread pattern for secure top-ring clamping.
Hex Nut Base Clamping: Fastens to standard rails using a torqued 1/2-inch hex nut on an 8-32 thread interface to prevent mechanical shift.
Standard Rail Fitment: Compatible directly with standard Picatinny and Weaver mounting bases.

Specifications

Ring Diameter: 34 mm
Height Profile: Low
Overall Unit Height: 53 mm (2.1 in)
Combined Weight: 202 g (7.1 oz)
Mounting Base Interface: Weaver / Picatinny
Base Clamp Fastener: 1/2-inch hex nut (8-32 thread)
Top Ring Screws: Double Torx T15 per ring (6-48 thread)
Material: Solid high-tensile steel
Finish: Matte black

Who is the Hawke Precision Steel 34mm Low Ring Mount for?

Long-range precision shooters — mounting 34 mm main tube optics to flat-top centrefire rifles where an overall unit height of 53 mm (2.1 in) provides close-to-bore alignment and solid steel rigidity ensures zero retention.
Heavy-recoil hunters — needing a 34mm low scope ring system weighing 202 g (7.1 oz) to secure large-tube optics against magnum recoil impulses without shifting on standard Picatinny or Weaver bases.

Less suitable for: Optics with 1-inch or 30 mm main tubes, rifles equipped with 9–11 mm or 3/8-inch European dovetails without adapters, or large 50 mm–56 mm objective scopes mounted over heavy bull barrels that require medium or high-clearance mounting rings to prevent receiver contact.

SKU	HWK39785LP
Model #	23020
Brand	Hawke
Shipping Weight	1.0000kg

What our Customers are Saying

Recommended Products

Hawke 22115 Match Mount 30mm 2 Piece Weaver Low Ri

$83.95

Hawke Match Mount 22100 Scope Rings 1 Inch 9-11mm

$74.95

Hawke Match Mount 22112 Weaver Scope Rings 1 Inch

$83.95

Accura Acal1lwp 1 Inch Low Profile Scope Rings For

$28.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Hawke 23020 Precision Steel Ring Mounts 34mm Low Weaver

Secure Payment Methods