The Hawke Match Mount 1" 2 Piece Weaver Low provides a stable, low-profile mechanical interface for mounting 1-inch (25.4 mm) maintube riflescopes to standard Weaver-pattern rail systems. Machined from high-grade aluminium with a matte black anodized finish, this two-piece ring set has an overall height of 40 mm and a total weight of 71 g. An integrated crossbar seats into the rail slots for recoil retention, while internal synthetic cushion tape prevents scope body marring and double hex top screws maintain uniform clamping tension.

Key Features

• Precision Machined Aluminium: High-grade construction featuring rounded edges to eliminate tube pinching during optic installation.
• Internal Cushion Tape: Factory-fitted internal lining prevents tube surface scratches and enhances optic grip without slippage.
• Double Hex Top Caps: Fastens with 4 hex screws per ring (8 screws across the set) utilizing a 3 mm hex drive with M4x0.7 threads to secure zero against standard recoil.
• Weaver Crossbar Retention: Built-in base crossbars lock mechanically into standard Weaver rail slots to stop forward movement.

Specifications

• Tube Diameter: 1 Inch (25.4 mm)
• Mount Profile: Low
• Overall Height: 40 mm (1.6 inches)
• Weight: 71 g (2.5 oz)
• Material: High-grade aluminium
• Finish: Matte black anodized
• Rail Interface: Standard Weaver rail systems
• Top Screw Drive: 3 mm hex drive (M4x0.7 thread)
• Rail Clamp Drive: 3 mm hex drive (M3.5x0.6 thread)

Who is the Hawke Match Mount Weaver Low for?

• Rimfire pest controllers — requires an overall height of 40 mm to mount small-objective optics (≤32 mm to 40 mm) as close to the barrel bore as possible on Weaver-railed rimfires without adding unnecessary bulk to the 71 g setup.
• Hunters running standard sporting calibres — secures 1-inch (25.4 mm) maintube riflescopes using a double hex 4-screw top cap design across standard Weaver rail systems to maintain zero and provide an optimal, low cheek weld.

Less suitable for: Riflescopes with objective lens diameters larger than 40 mm (such as 44 mm, 50 mm, or 56 mm models), which require Medium (44 mm height) or High (49 mm height) scope mounts to avoid barrel contact; and heavy recoiling magnum calibres or high-impact tactical setups, which require solid steel scope rings for greater shear strength.