The Hornady Custom Grade New Dimension (CGND) .32 Cal. Seating Die (MPN: 044113) is a precision handloading tool engineered to seat and crimp .32-calibre rifle and handgun cartridges. Built from precision-machined, heat-treated steel with a polished internal finish, this single-station die utilizes an in-line seating system to prevent shaved jackets and eliminate bullet runout. It is designed to fit standard reloading presses via industry-standard 7/8"-14 threading, delivering benchrest-level concentricity across thin-necked and small-bore cartridge brass.

Key Features

  • Floating In-Line Bullet Seating: Utilizes a floating bullet alignment sleeve and floating steel seating stem that pre-aligns the case neck and projectile before seating begins.
  • Built-In Roll Crimper: Features an internal roll-crimp shoulder that allows simultaneous bullet seating and case crimping, or can be adjusted upward for a seat-only operation.
  • Sure-Loc™ Lock Ring: Clamps around the entire die circumference using an Allen-head cross-bolt to maintain precise depth settings without damaging the exterior 7/8"-14 threads.
  • Polished Internal Finish: Heat-treated steel construction reduces internal friction and limits brass wear during repetitive cycling.

Product Specifications

  • Manufacturer Part Number: 044113
  • Press Threading: Standard 7/8"-14 TPI
  • Bullet Diameter Compatibility: .311" to .312" nominal bullet diameters (supports legacy .308" .32-20 loadings)
  • Compatible Cartridges: .32-20 Winchester, .32 Auto (.32 ACP)
  • Operation: Manual, single-stage mechanical benchtop reloading
  • Physical Profile: 110 mm to 130 mm overall length; shipping weight approximately 200 g to 250 g

Who is the Hornady 32 Cal. Seating Die For 32-20 Win, 32 Auto for?

  • Handloaders loading .32-20 Winchester for lever-action rifles and single-action revolvers — aligns projectiles sized between .311" and .312" nominal diameter inside a floating internal sleeve, preventing bullet runout and crushed brass on fragile, thin-walled .32-20 Win cases during reloading.
  • Handloaders loading .32 Auto for vintage and target semi-automatic pistols — mounts to standard 7/8"-14 threaded reloading presses to seat small .311" diameter bullets to consistent overall cartridge lengths while applying an optional roll crimp.

Less suitable for: Handloaders processing straight-walled revolver cartridges such as .32 S&W Long, .32 H&R Magnum, or .327 Federal Magnum; these extended cases exceed this die's internal case sleeve dimensions and crimp profile, requiring a dedicated multi-calibre .32 revolver seating die set.

SKU HN42514LP
Model # 044113
Brand Hornady
Shipping Weight 1.0000kg

What our Customers are Saying