Hornady 044130 35 Remington Seating Die Floating Sleeve
Secure Payment Methods
Calculate Shipping
The Hornady Custom Grade New Dimension Seating Die (.35 Remington) is a dedicated reloading die engineered to seat .358-inch diameter projectiles into .35 Remington rifle brass. Machined with standard 7/8"-14 threads, it integrates directly with standard single-stage and progressive reloading presses. It features a floating in-line bullet seating sleeve that aligns the cartridge case, projectile, and seating stem before pressing begins, eliminating alignment errors to maintain tight cartridge overall length tolerances. A polished internal finish prevents case galling, while an integrated crimping shoulder allows users to apply a roll crimp or seat without crimping by adjusting the die body relative to the press stroke.
Key Features
- Floating In-Line Alignment: Utilises an internal floating sleeve to capture and guide the .358-inch projectile into alignment with the case neck prior to seating, reducing bullet run-out.
- Built-In Roll Crimper: Features an internal shoulder that enables bullet seating and roll crimping in a single press stroke, or bullet seating alone depending on die body height adjustment.
- Sure-Loc Lock Ring: Clamps across the 7/8"-14 thread pitch using a split-ring hex screw to secure die settings without damaging or gouging the steel threads.
- Polished Internal Cavity: Precision-machined internal surfaces minimise friction marks and prevent brass shaving during handloading.
Specifications
- Product Type: Rifle bullet seating die
- Calibre: .35 Remington
- Compatible Bullet Diameter: .358 inches
- Press Mounting Thread: 7/8"-14 TPI
- Die Weight: Approximately 250 g to 350 g
- Operation Mode: Manual / mechanical reloading press
Who is the Hornady 35 Remington Seating Die for?
- Handloaders loading .35 Remington ammunition — Requires a 7/8"-14 thread pitch die configured to seat .358-inch diameter projectiles into .35 Remington cases for platforms like the Marlin 336.
- Shooters seeking to minimize bullet run-out — Benefits from the floating in-line seating sleeve of this 35 Remington rifle seating die, which pre-aligns .358-inch bullets before seating to maintain concentricity.
Less suitable for: Reloaders needing to process alternative .35-calibre cartridges such as .35 Whelen or .350 Legend, or those requiring brass resizing, depriming, and case neck expansion; these operations require a dedicated calibre-specific full-length sizing die or expander die.
| SKU | HN42522LP |
| Model # | 044130 |
| Brand | Hornady |
| Shipping Weight | 1.0000kg |