The Hornady Custom-Grade™ New Dimension™ Seating Die (MPN 044134) is a dedicated reloading die engineered specifically for the 6.5x52mm Carcano cartridge. Machined from polished steel with standard 7/8"-14 threads, it integrates a free-floating bullet alignment sleeve that captures the case neck, bullet, and seating stem in true coaxial alignment before seating begins. This mechanical design ensures consistent bullet concentricity and reduces runout when pressing projectiles into vintage or formed brass. It also features a built-in roll crimp that allows reloaders to seat and crimp in a single stroke, or adjust the die upward to seat without applying a crimp.

Key Features

  • In-Line Alignment System: Utilises a free-floating internal sleeve that pre-aligns the cartridge case neck, bullet, and seating punch along the same axis before seating pressure is applied.
  • Integrated Roll Crimper: Built-in crimp shoulder enables single-stroke bullet seating and roll crimping, or can be backed out for crimp-free seating.
  • Sure-Loc™ Lock Ring: Clamps around the standard 7/8"-14 die threads using an external hex bolt, locking settings in place without cutting into the thread surface.
  • MicroJust™ Upgrade Ready: Fully compatible with Hornady's optional MicroJust seating micrometer, allowing handloaders to adjust seating depth in direct .001" increments.
  • Unpowered Manual Operation: Operates mechanically on standard reloading benches without electrical connections.

Product Specifications

  • Calibre Compatibility: 6.5x52mm Carcano
  • Nominal Bullet Diameter: .267" (also accommodates .268" diameter Carcano projectiles)
  • Press Interface: 7/8"-14 standard reloading die threading
  • Matching Shell Holder: Hornady #21
  • Associated Die Series: Series III Rifle Die Set
  • Product Weight: Approximately 200–250 g
  • Packaged Length: Approximately 12–15 cm

Who is the Hornady 6.5x52 Carcano Seating Die for?

  • Historical Military Rifle Enthusiasts — Requires dedicated alignment geometry for restoring and shooting surplus Italian service arms, providing true in-line bullet seating specifically mapped to the dimensions of the vintage 6.5x52mm Carcano cartridge across standard 7/8"-14 threaded presses.
  • Target Handloaders Using Bore-Specific Projectiles — Needs an internal sleeve and seating assembly sized specifically to guide nominal .267" diameter Carcano bullets into case necks without damaging projectile jackets or introducing bullet runout, making this 6.5x52 Carcano rifle reloading seating die essential for authentic surplus carbine accuracy.

Less suitable for: Loaders assembling standard .264" bore cartridges such as 6.5mm Creedmoor or 6.5x55 Swedish, or wider 7.35x51 Carcano brass; standard .264-calibre rifle seating dies or dedicated 7.35mm seating dies are required to match those specific bullet diameters and case neck dimensions.

SKU HN42525LP
Model # 044134
Brand Hornady
Shipping Weight 1.0000kg

What our Customers are Saying