Hornady 044142 M1 Carbine Seating Die 30 Calibre
Secure Payment Methods
Calculate Shipping
The Hornady Custom-Grade New Dimension Seater Die (MPN 044142) is an in-line reloading die engineered to seat bullets to precise depths and uniform overall cartridge lengths (OAL) for .30 M1 Carbine ammunition. Built with standard 7/8"-14 threading, this mechanical steel die integrates directly into single-stage, turret, and progressive reloading presses. It features Hornady's sliding alignment sleeve system, which pre-aligns the bullet and cartridge case mouth before seating begins, preventing shaved bullet jackets and minimising runout on finished rounds.
Key Features
- Floating Bullet Alignment Sleeve: Captures and aligns the .308" diameter projectile, case neck, and seating stem concurrently before the bullet enters the case mouth to virtually eliminate bullet runout.
- Sure-Loc Lock Ring: Features an integrated split-clamp design with wrench flats that secures the die position across the 7/8"-14 outer threads without pinching or damaging the steel body.
- Polished Steel Internal Surfaces: Machined from hardened steel with mirror-polished internal finishes to ensure friction-free brass feeding and prevent case galling or scratching.
- Integrated Roll Crimp Shoulder: Allows users to seat and apply a roll crimp simultaneously, or adjust the die upward to seat without crimping when using separate taper crimping dies.
Specifications
- Calibre: .30 M1 Carbine (.308" bullet diameter)
- Die Type: Bullet Seating Die (New Dimension series)
- Thread Standard: 7/8"-14 standard reloading press thread
- Weight: Approximately 0.204 kg (7.2 oz)
- Packaged Dimensions: Approximately 122 mm (L) × 36 mm (W) × 36 mm (H)
- Material: Precision-ground, heat-treated steel
- Operation: Manual, non-powered press installation
Who is the Hornady 30 M1 Carbine Seating Die for?
- Handloaders reloading .30 M1 Carbine ammunition — mounts via industry-standard 7/8"-14 threading to support single-stage or progressive press configurations when processing .30 M1 Carbine cartridges.
- Shooters seeking to eliminate bullet runout — utilises a 0.204 kg hardened-steel floating bullet alignment sleeve that captures the .30 M1 Carbine case and projectile simultaneously before the seating stem engages the bullet.
Less suitable for: Handloaders seeking to seat bottleneck .30-calibre cartridges (such as .308 Winchester or .30-06 Springfield) or alternative straight-walled pistol cases, which require dedicated calibre-specific seating dies; reloaders without a separate Hornady #22 shell holder or equivalent press interface will also require that component before operation.
| SKU | HN42554LP |
| Model # | 044142 |
| Brand | Hornady |
| Shipping Weight | 1.0000kg |