The Hornady Custom-Grade New Dimension Bullet Seating Die (.40 S&W / 10mm Auto) is an individual metallic cartridge reloading die engineered to seat .400-inch diameter projectiles to a consistent overall cartridge length (C.O.A.L.). Built from hardened steel with an industry-standard 7/8"-14 thread interface, this manual die installs directly into standard single-stage, turret, and progressive reloading presses. It features an in-line seating system that aligns the projectile axially with the charged case neck before seating to minimise bullet runout.

Key Features

  • In-Line Bullet Seating: Utilises an internal floating alignment sleeve and seating stem to guide and centre both the projectile and case neck axially prior to pressing the bullet into position.
  • Standard Thread Mounting: Incorporates a 7/8"-14 thread interface to ensure direct compatibility with standard metallic cartridge reloading presses.
  • Sure-Loc Lock Ring: Clamps around the die threads via an Allen screw to hold precise seating depth settings without damaging the exterior threading.
  • Quick Disassembly: Features an internal retainer clip mechanism that permits removal of the seating stem and alignment sleeve for regular cleaning without losing lock-ring adjustment.
  • Mechanical Operation: Operates entirely manually with no electrical components, power requirements, or electronic calibration needed.

Specifications

  • Thread Interface: 7/8"-14
  • Calibre Compatibility: .40 Smith & Wesson (.40 S&W) and 10mm Auto
  • Bullet Diameter Compatibility: .400 inch
  • Material: Hardened steel
  • Packaged Weight: Approximately 0.25 kg to 0.35 kg
  • Power Requirements: None (manual mechanical tool)
  • Included Hardware: Seater die body, floating alignment sleeve, seating stem, and Sure-Loc lock ring

Who is the Hornady Custom-Grade Seating Die for?

  • Reloaders assembling .40 S&W ammunition — Requires a pistol bullet seating die configured specifically for .400 inch bullet diameters and matching case profiles, mounting directly into standard press setups using a 7/8"-14 thread interface.
  • Reloaders assembling 10mm Auto ammunition — Uses the dedicated .400 inch bullet alignment sleeve to axially guide bullets into 10mm Auto cases on any single-stage or progressive press equipped with 7/8"-14 threading.

Less suitable for: Handloaders assembling cartridges outside the .400-inch diameter profile, such as .355-inch (9mm) or .452-inch (.45 Auto) rounds, who require calibre-specific seating dies engineered for those specific case and projectile dimensions.

SKU HN42557LP
Model # 044146
Brand Hornady
Shipping Weight 1.0000kg

What our Customers are Saying