Hornady 044149 Bullet Seating Die 444 Marlin Steel 7 8 14
Secure Payment Methods
Calculate Shipping
The Hornady Custom Grade New Dimension Bullet Seating Die is an in-line reloading die engineered to seat .430-inch projectiles into .444 Marlin cartridge cases. Constructed from precision-machined, heat-treated steel with a polished internal finish, this die features an internal roll-crimp shoulder designed to lock projectiles securely against heavy recoil in tubular magazines. The die utilizes industry-standard 7/8"-14 threads, making it compatible with standard single-stage, turret, and progressive reloading presses. It operates as a purely mechanical workshop accessory and does not require electrical power or licensing under Australian state firearms acts.
Key Features
- Floating Bullet Alignment Sleeve: Features Hornady's patented New Dimension in-line sleeve that pre-aligns the case neck and projectile before seating, minimizing bullet runout and preventing jacket shaving.
- Integrated Roll Crimp: Incorporates a built-in roll-crimp shoulder calibrated for straight-wall and slightly tapered .444 Marlin cases to prevent bullet setback under recoil.
- Sure-Loc™ Lock Ring: Utilizes an Allen-screw collar clamp that applies even pressure across external threads without damaging the die body.
- Standard Press Integration: Machined with a 7/8"-14 thread pitch to fit any standard reloading press.
Specifications
- Calibre: .444 Marlin
- Bullet Diameter: .430 inches
- Die Threading: 7/8"-14 thread pitch
- Construction: Heat-treated, polished tool steel
- Packaged Dimensions: Approximately 22 × 13 × 22 cm
- Weight: Approximately 0.35 to 0.5 kg (boxed)
- Power Requirements: Manual / mechanical operation
Who is the Hornady 444 Marlin Seating Die for?
- Handloaders loading .444 Marlin hunting ammunition — Features an integrated roll-crimp shoulder and an in-line alignment sleeve specifically calibrated to seat .430-inch projectiles into .444 Marlin cases, securing ammunition against recoil in tubular lever-action magazines.
- Reloaders replacing an individual Hornady Series II die — Matches the 7/8"-14 thread pitch and chamber geometry required to replace or supplement the seating station in a Hornady Series II 3-die set for .444 Marlin brass.
Less suitable for: Handloaders processing shorter .44 Magnum or .44 Special brass, larger-diameter .458-inch (.45-70 Government) cases, or non-cannellured projectiles with varied trim lengths; these applications require calibre-specific dies with correct case lengths or a separate, dedicated taper crimp die.
| SKU | HN42559LP |
| Model # | 044149 |
| Brand | Hornady |
| Shipping Weight | 1.0000kg |