Hornady 044152 Seating Die 45-70 Govt 450 Marlin 7/8"-14
Secure Payment Methods
Calculate Shipping
The Hornady Custom Grade New Dimension Bullet Seating Die (MPN: 044152) is engineered to seat .458-inch rifle projectiles into .45-70 Government and .450 Marlin cartridge cases. Built from polished steel, this non-electrical reloading die utilizes standard industry 7/8"-14 mounting threads to fit standard single-stage and progressive reloading presses. It features an internal floating alignment sleeve that captures the case neck and projectile prior to seating, eliminating bullet canting, runout, and base deformation. The die body also incorporates a built-in roll-crimp feature to seat and crimp in a single pass or seat without crimping.
Key Features:
- In-Line Floating Alignment Sleeve: Hornady's New Dimension sleeve and stem system aligns both the cartridge neck and .458" bullet before seating begins, preventing bullet deformation and runout.
- Integrated Roll-Crimp Capability: Applies a mechanical roll crimp to secure projectiles in high-recoil tubular magazines, or can be adjusted off to seat bullets without crimping.
- Sure-Loc™ Lock Ring: Features a 7/8"-14 thread clamp design with wrench flats that grips the threads evenly without marring the die body.
- Modular Stem Compatibility: Integrates with optional add-ons, including the Hornady Microjust Seating Stem and dedicated stems for flex-tip projectiles.
Specifications:
- Manufacturer Part Number (MPN): 044152
- Cartridge Compatibility: .45-70 Government (.45-70 Govt), .450 Marlin
- Projectile Calibre/Diameter: Nominal .458-inch rifle bullets
- Press Thread Pitch: Standard 7/8"-14 thread
- Construction: Polished steel
- Operation: Mechanical / manual
Who is the Hornady 45 Cal. Seating Die For 45-70 Government, 450 Marlin for?
- Handloaders loading big-bore lever-action, single-shot, or bolt-action rifles — mounts into any standard reloading press using standard 7/8"-14 thread pitch to seat .458-inch diameter projectiles into straight-walled .45-70 Government and .450 Marlin cases with concentric alignment.
- Australian hunters targeting feral boar, buffalo, and scrub bulls — provides the capability to apply a built-in roll crimp on heavy cast or jacketed .458-inch bullets via this 45-70 rifle reloading die on a 7/8"-14 thread press, preventing projectile setback during heavy recoil.
Less suitable for: Handloaders assembling ammunition with .451-inch to .454-inch pistol bullets, bottleneck cases, or rubber flex-tip projectiles using only the factory-included standard stem; loaders using .45 ACP or .45 Colt require dedicated pistol seating dies, while those loading FTX or MonoFlex projectiles require a dedicated flex-tip seating stem.
| SKU | HN42528LP |
| Model # | 044152 |
| Brand | Hornady |
| Shipping Weight | 1.0000kg |