The Hornady 9x18 Makarov Seating Die (MPN: 044154) is a precision-machined, heat-treated steel Custom Grade™ reloading tool engineered specifically for the 9x18mm Makarov cartridge. Featuring industry-standard 7/8"-14 TPI threads, it mounts to standard single-stage and progressive reloading presses. The die incorporates an in-line internal floating bullet alignment sleeve that captures and pre-aligns nominal .364 in (9.25 mm) projectiles with the cartridge case mouth before seating, eliminating bullet canting and minimising runout. It is a purely mechanical workshop accessory that requires no electrical power.

Key Features

  • In-Line Alignment Sleeve: Uses an internal floating steel sleeve that centers the .364 in projectile over the cartridge neck prior to engagement with the seating stem, ensuring concentric bullet seating.
  • Integrated Crimp Shoulder: Allows handloaders to seat and apply a taper crimp simultaneously, or seat without crimping by adjusting the die body upwards.
  • Sure-Loc™ Lock Ring: Features a 360-degree split-ring clamp design with wrench flats that grips 7/8"-14 TPI threads securely without damaging the die body.
  • Universal Press Fitment: Compatible with any standard reloading press accepting 7/8"-14 threaded dies, requiring as few as three fully engaged threads for stable operation.
  • Hardened Steel Construction: Precision-machined, heat-treated steel with polished internal surfaces prevents brass galling and ensures dimensional repeatability across long production runs.

Product Specifications

  • Calibre: 9x18mm Makarov
  • Compatible Projectile Diameter: .364 in (9.25 mm) nominal
  • Die Thread Interface: 7/8"-14 TPI
  • Material: Heat-treated hardened steel with polished internal surfaces
  • Die Profile: Standard 7/8" profile, approximately 1.25" outer diameter
  • Estimated Unit Weight: Approximately 200–250 g (7–9 oz)
  • Power Requirements: None (0V / 0W mechanical reloading tool)

Who is the Hornady 9x18 Makarov Seating Die for?

  • Handloaders reloading for surplus military pistols — Requires precision seating for nominal .364 in (9.25 mm) projectiles into 9x18mm Makarov brass cases to maintain consistent overall length and reliable cycling in surplus handguns such as the Makarov PM and CZ 82.
  • Category H competitive sport shooters and collectors — Relies on this 9x18 Makarov seating die to mount securely into standard 7/8"-14 TPI presses, achieving the consistent bullet concentricity and crimp retention required for target shooting with registered 9x18mm handguns.

Less suitable for: Reloaders loading standard 9mm Luger (9x19mm) or .380 ACP ammunition using .355 in projectiles, which will not properly align in this die's internal sleeve; this application requires a dedicated 9x19mm or .380 ACP seating die. Additionally, it is unsuitable for large-format reloading presses with 1-1/4"-12 threaded stations unless used with a 1-1/4"-12 to 7/8"-14 thread reducer bushing.

SKU HN42562LP
Model # 044154
Brand Hornady
Shipping Weight 1.0000kg

What our Customers are Saying