Hornady 044155 Seating Die 50 Action Express Floating Sleeve
Secure Payment Methods
Calculate Shipping
The Hornady Custom-Grade New Dimension Seating Die (.50 Action Express) is an individual mechanical reloading tool engineered to seat .500-inch diameter projectiles into prepared .50 Action Express brass. Built from polished, precision-machined steel, this single-stage die mounts into standard reloading presses using an industry-standard 7/8"-14 thread interface. It utilizes an in-line floating bullet alignment sleeve and floating steel seating stem that pre-aligns the bullet and case mouth before the seating stroke begins, minimizing bullet runout and protecting project jacket bases from shaving or deformation.
Key Features
- In-Line Floating Alignment Sleeve: Pre-aligns the .500-inch bullet and case neck prior to seating to minimize concentricity runout.
- Integrated Crimp Capability: Features an internal roll/crimp ring capable of seating and crimping in a single stroke, or seating without crimping when the die body is backed off the shell holder.
- Sure-Loc Lock Ring: Uses a split-ring clamp mechanism with wrench flats that threads onto standard 7/8"-14 dies and locks without marring the steel threads.
- O-Ring Tension Adjustment: Incorporates an internal compression O-ring on the adjustment screw to prevent drift during continuous reloading cycles.
Specifications
- Cartridge Compatibility: .50 Action Express (.50 AE)
- Compatible Projectile Diameter: .500 inches
- Mounting Thread: Standard 7/8"-14 thread
- Material: Precision-machined, polished steel
- Power Requirements: None (manual mechanical operation)
- Operation: Single-stage cartridge seating
Who is the Hornady 50 AE Seating Die for?
- Handloaders assembling .50 Action Express ammunition for semi-automatic handguns — Mounts directly into reloading presses with standard 7/8"-14 threads to reliably seat .500-inch diameter projectiles into .50 AE brass cases.
- Reloaders seeking to reduce bullet runout and prevent jacket deformation — Uses an in-line floating sleeve inside this .50 AE reloading seating die to guide .500-inch bullets straight into the case neck before engagement, preventing sheared jackets and seating misalignment.
Less suitable for: Other large-bore .50-calibre cartridges such as the .500 S&W Magnum or .50 BMG due to mismatched case geometry, reloaders requiring indexed and repeatable seating depth tracking who need a micrometer seating stem upgrade, or operations with heavy case flaring that require a separate dedicated taper-crimp die.
| SKU | HN42563LP |
| Model # | 044155 |
| Brand | Hornady |
| Shipping Weight | 1.0000kg |