Hornady 044164 6.5 Grendel Bullet Seating Die Floating Sleeve
Secure Payment Methods
Calculate Shipping
The Hornady Custom Grade New Dimension 6.5 Grendel Bullet Seating Die is an all-steel reloading tool engineered to seat and optionally roll-crimp .264" diameter rifle projectiles into 6.5 Grendel cartridge cases. Built for use in standard reloading presses using industry-standard 7/8"-14 threads, this mechanical die incorporates an internal floating alignment sleeve to ensure concentric bullet placement. Packaged at approximately 0.26 kg, it secures to the press with a split Sure-Loc lock ring that clamps onto the threads without causing damage.
Key Features
- In-Line Floating Alignment Sleeve: Pre-aligns the cartridge case neck, bullet, and seating stem coaxially before seating force is applied, preventing bullet runout and shaved projectile jackets.
- Built-In Roll Crimp: Features an integrated internal crimp ring that allows handloaders to apply a roll crimp to cannelured bullets during seating, or back off the die to seat without crimping.
- Micro-Adjustable Seater Stem: Uses a fine-threaded adjustment screw backed by an internal O-ring retainer to provide friction-held, precise bullet seating depth control.
- Sure-Loc Lock Ring: Applies radial clamping force via an external screw across standard 7/8"-14 threads, locking die position without driving a steel screw directly into the thread ridges.
Specifications
- Brand: Hornady
- Model Number: 044164
- Cartridge Compatibility: 6.5 Grendel
- Bullet Diameter Compatibility: .264"
- Press Thread Pattern: 7/8"-14
- Packaged Weight: Approximately 0.26 kg (0.58 lbs)
- Packaged Dimensions: Approximately 17.5 cm × 3.2 cm × 3.2 cm
- Operation: Mechanical / non-powered
Who is the Hornady 6.5 Grendel Seating Die for?
- Handloaders loading ammunition for 6.5 Grendel rifles — mounts into standard reloading presses using 7/8"-14 threads to reliably seat .264" diameter rifle projectiles into dedicated 6.5 Grendel cases.
- Reloaders seeking in-line floating alignment for precision projectile seating — relies on the 0.26 kg Hornady 6.5 Grendel seating die's internal sliding sleeve to maintain straight coaxial alignment of the .264" bullet before downward ram pressure occurs.
Less suitable for: Handloaders loading longer 6.5mm cartridges such as 6.5 Creedmoor or 6.5 PRC, which exceed the 6.5 Grendel die body length and require cartridge-specific seating dies, or those loading sharp-profile, high-BC match projectiles who require dedicated ELD or A-Tip match seating stems to prevent tip deformation.
| SKU | HN42564LP |
| Model # | 044164 |
| Brand | Hornady |
| Shipping Weight | 1.0000kg |