The Hornady Custom-Grade New Dimension Seating Die (.300 AAC Blackout) is a precision handloading tool engineered to seat and crimp .308-inch (7.82 mm) diameter projectiles into .300 AAC Blackout and .300 Whisper cartridge cases. Utilizing an internal floating bullet alignment sleeve, this die centers the projectile and case neck in perfect alignment before the seating stem applies downward pressure, effectively minimizing bullet runout. Built with an industry-standard 7/8"-14 thread pitch, it mounts directly to standard single-stage, turret, and progressive reloading presses.

Key Features

  • Floating Bullet Alignment Sleeve: Pre-aligns the bullet and case neck before the seating stem makes contact, ensuring concentric seating and reducing projectile runout.
  • Integrated Crimp Shoulder: Features an internal roll/crimp shoulder that allows simultaneous seating and crimping, or can be adjusted upward to seat projectiles without applying a crimp.
  • Sure-Loc Lock Ring: Clamps around the entire die body across the 7/8"-14 threads without driving set screws directly into the thread surface, preventing thread damage during press setup changes.
  • Optimised Calibre Dimensions: Dimensioned specifically to support the 34.7 mm (1.368 in) case length of .300 AAC Blackout and .300 Whisper ammunition.

Specifications

  • Cartridge Compatibility: .300 AAC Blackout / .300 Whisper
  • Compatible Bullet Diameter: .308 in (7.82 mm)
  • Compatible Case Length: Approx. 34.7 mm (1.368 in)
  • Thread Pitch: 7/8"-14
  • Shipping Weight: 0.45 kg (1 lb)
  • Required Shellholder: Hornady #16 (or equivalent .223 Remington bolt-face shellholder)
  • Operation: Manual / mechanical reloading press interface

Who is the Hornady 300 Aac Blackout Seating Die for?

  • Reloaders handloading .300 AAC Blackout ammunition on standard presses — Mounts via a standard 7/8"-14 thread pitch to seat .308 in diameter projectiles into nominal 34.7 mm brass cases using single-stage, turret, or progressive reloading setups.
  • Shooters looking to minimize bullet runout — Integrates an internal floating alignment sleeve inside this .300 AAC Blackout reloading seating die to physically capture and align the .308 in projectile with the case neck prior to seating pressure being applied.

Less suitable for: Reloading longer .30-calibre cartridges exceeding the 34.7 mm case length limit, such as .308 Winchester or .30-06 Springfield, which require full-length, calibre-specific .30-calibre seating dies due to depth constraints; it also requires a dedicated #16 or .223-pattern shellholder rather than standard .308-family shellholders.

SKU HN42565LP
Model # 044165
Brand Hornady
Shipping Weight 1.0000kg

What our Customers are Saying