Hornady 044390 Bullet Seating Die 8.6 Blackout 338 Arc
Secure Payment Methods
Calculate Shipping
The Hornady Custom-Grade™ New Dimension™ Bullet Seating Die (MPN: 044390) is a dedicated reloading tool engineered to seat .338-calibre projectiles into .338 ARC and 8.6 Blackout (8.6 BLK) cartridge cases. Machined with industry-standard 7/8"-14 threads, this die mounts directly into standard reloading presses to deliver precise axial alignment. A patented sliding alignment sleeve captures the cartridge neck and projectile before the seating stem engages, significantly reducing bullet runout and preventing jacket deformation when assembling factory-specification subsonic rounds or high-performance supersonic loads.
Key Features
- Floating In-Line Seater Sleeve: Hornady's New Dimension™ alignment sleeve pre-aligns the case neck and .338-calibre projectile prior to seating, ensuring straight entry and minimising concentricity errors.
- Built-In Roll Crimp: Features an integrated roll crimp capability within the die body, allowing reloaders to seat and crimp in a single stroke or adjust the die upward to seat without crimping.
- Sure-Loc™ Lock Ring: Utilises a split-ring design with an external cross-bolt that clamps firmly around the 7/8"-14 threads without driving a screw point into the metal, maintaining depth settings across loading sessions.
- Universal Press Fitment: Standard 7/8"-14 threading ensures compatibility with common single-stage, turret, and progressive reloading presses used by Australian handloaders.
Specifications
- Product Type: Bullet seating die
- Manufacturer Part Number (MPN): 044390
- Thread Interface: 7/8"-14 thread
- Calibre Compatibility: .338-calibre projectiles
- Supported Cartridges: .338 ARC, 8.6 Blackout
- Packaged Weight: Approximately 0.23–0.30 kg (8–10 oz)
- Included Components: In-line seating sleeve and die body, standard .338 seating stem, Sure-Loc™ lock ring
- Power Requirements: None (manual reloading equipment)
Who is the Hornady 338 Arc/8.6 Blackout Seating Die for?
- Reloaders assembling 8.6 Blackout ammunition — mounts via industry-standard 7/8"-14 threads to reliably seat heavy .338-calibre projectiles into shortened short-action brass for suppressed shooting platforms.
- Reloaders handloading .338 ARC cartridges — utilises the in-line sliding sleeve to pre-align .338-calibre bullets with micro-bolt or AR-pattern case necks, keeping runout to a minimum without damaging thin jacket walls.
- Australian hunters and target shooters — fits standard 7/8"-14 single-stage or progressive presses to craft specialized .338-calibre subsonic or supersonic ammunition locally where commercial factory cartridges are limited.
Less suitable for: Handloaders seeking a single tool to reshape fired brass, as this bullet seating die does not perform full-length case sizing and must be paired with a dedicated full-length resizing die. It is also less suitable for seating radically pointed, high-BC projectiles such as Hornady A-TIP bullets unless the standard stem is replaced with a custom-profile seating stem to prevent projectile tip damage.
| SKU | HN42579LP |
| Model # | 044390 |
| Brand | Hornady |
| Shipping Weight | 1.0000kg |