The Hornady Custom Grade New Dimension Expander Die (.38 Super Auto / .38 S&W, MPN 044526) serves as the second stage in a standard three-die handgun reloading sequence. Designed specifically for straight-walled pistol cases, this unpowered mechanical die slightly expands the internal neck diameter and applies a uniform flare or bell to the case mouth. This process prevents the shaving of lead, plated, or jacketed bullet material during seating, facilitating concentric alignment for nominal .355-inch to .357-inch diameter handgun projectiles.

Key Features

  • Precision Case Flaring: Expands internal neck dimensions and bells the case mouth to ensure smooth bullet entry without shaving projectile coatings or jacketing.
  • Custom Grade Steel Construction: Precision-machined, polished steel die body measures approximately 2.5 to 3 inches in length to handle repeated press cycling.
  • Sure-Loc Lock Ring: Features standard wrench flats and a split-clamp design that locks securely around the threads without damaging or stripping the die body.
  • Universal Press Interface: Operates on standard 7/8"-14 thread patterns across single-stage and progressive reloading platforms.

Product Specifications

  • Product: Hornady Custom Grade New Dimension Expander Die
  • Model / MPN: 044526
  • Thread Interface: 7/8"-14
  • Calibre Compatibility: .38 Super Auto (.355), .38 ACP, and .38 S&W
  • Intended Projectile Diameter: Nominal .355" to .357"
  • Tool Body Length: Approximately 2.5 to 3 inches
  • Packaged Shipping Weight: Approximately 0.5 to 0.6 lbs (230 to 270 g)
  • Power Requirements: None (manual mechanical operation)

Who is the Hornady 38 Super Expander Die for?

  • Competitive IPSC Handgun Target Shooters — Loading high volumes of .38 Super Auto ammunition, this pistol case expander die provides the precise case mouth bell required to guide .355-inch competition projectiles cleanly into cases without shaving copper or lead.
  • Handloaders Using Progressive or Single-Stage Presses — Operating standard 7/8"-14 threaded reloading presses, users can install this pistol case expander die as a dedicated second-stage station to process .38 Super Auto or .38 S&W straight-walled brass.

Less suitable for: Handloaders seeking to expand the case mouth and drop powder simultaneously at a single press station (who require a powder-through expander die mechanism instead); operators loading .38 Special or .357 Magnum brass (who require part 044523); reloaders assembling 9x19mm Luger cartridges (who require a dedicated 9mm expander die due to differing case dimensions); or bottleneck rifle reloaders (who require full-length sizing dies with internal expander balls or mandrels rather than a standalone flaring die).

SKU HN42582LP
Model # 044526
Brand Hornady
Shipping Weight 1.0000kg

What our Customers are Saying