The Hornady 44 Cal. Expander Die is a dedicated reloading component engineered to apply a uniform, controlled mouth flare to straight-walled .44 calibre cartridge cases. As Step 2 in a conventional three-die pistol reloading setup, this mechanical die opens case mouths to seat projectiles squarely without shaving lead, damaging copper jackets, or crushing brass walls. It accommodates both .44 S&W Special (approx. 1.160-inch case length) and .44 Remington Magnum (approx. 1.285-inch case length) within its internal adjustment range, and it requires no electrical input for operation.

  • Controlled Case Mouth Expansion: Precision-machined internal expander stem produces a consistent bell on case mouths to smoothly accept flat-base, cast lead, plated, and jacketed bullets.
  • Threaded Stem Micro-Adjustment: Threaded expander stem enables precise depth adjustments to tailor the degree of flare to varying brass wall thicknesses and bullet profiles.
  • Sure-Loc Lock Ring: Features a split lock ring with integrated wrench flats that clamps around the threads to retain die depth settings without marring the die body.
  • Universal Mounting Standard: Machined with industry-standard 7/8"-14 threading to fit single-stage, turret, and progressive reloading presses.

Specifications

  • Brand: Hornady
  • Model Number: 044544
  • Series: Custom Grade™ / New Dimension
  • Thread Pitch: 7/8"-14
  • Compatible Calibres: .44 Remington Magnum, .44 S&W Special
  • Compatible Bullet Diameter: 0.429" to 0.430"
  • Length: Approximately 4.5" to 5.0"
  • Weight: Approximately 180 g to 230 g (0.4 lb to 0.5 lb)
  • Operation: Manual/mechanical

Who is the Hornady 44 Cal. Expander Die For 44 Magnum, 44 Special for?

  • Handloaders reloading .44 Magnum or .44 Special on single-stage or turret presses — threads into standard 7/8"-14 thread pitch press stations to mechanically expand straight-walled cases between sizing and bullet seating steps.
  • Shooters casting lead bullets — opens brass mouth diameters sufficiently to guide nominal 0.429" to 0.430" diameter cast projectiles into the case without shaving the bearing surface or deforming soft lead bases during seating.

Less suitable for: Handloaders running progressive presses equipped with powder-through expanding systems, where a dedicated expander die is redundant, or those working with bottleneck rifle cases, .38/.357 calibres, or .45 Colt cases, which require calibre-specific expander mandrels.

SKU HN42583LP
Model # 044544
Brand Hornady
Shipping Weight 1.0000kg

What our Customers are Saying