Hornady 046201 Full Length Die 17 Remington 7/8 In-14 Thread
Secure Payment Methods
Calculate Shipping
The Hornady Custom-Grade New Dimension Full Length Sizer Die for .17 Remington (MPN: 046201) is an individual reloading tool engineered to return fired cartridge cases back to SAAMI factory specifications while simultaneously decapping spent boxer primers. Machined with a standard 7/8"-14 thread pitch, this steel die integrates into standard stationary reloading presses. It features Hornady's Zip Spindle design with incremental threads for slip-free micro-adjustments, an elliptical expander ball that significantly limits neck drag to protect thin .17 calibre case shoulders from collapsing, and a Sure-Loc lock ring that clamps evenly without marring the threads.
Key Features
- Elliptical Expander Ball: Polished elliptical expander reduces internal neck friction and stretching on delicate .17 calibre brass, helping prevent shoulder deformation during the upward press stroke.
- Zip Spindle™ Collet: Lightly threaded spindle eliminates slippage during decapping and permits rapid vertical adjustment or fine positioning of the decapping pin.
- Sure-Loc™ Lock Ring: Splits to clamp around the perimeter of the 7/8"-14 die body, maintaining precise depth alignment between reloading setups.
- Heat-Treated Steel Construction: Built to endure high-pressure reloading cycles across standard stationary bench presses without internal dimensional distortion.
Specifications
- Product Name: Hornady Custom-Grade New Dimension Full Length Sizer Die – .17 Remington
- Model / MPN: 046201
- Die Type: Full-length sizer and decapper (Series III)
- Calibre Compatibility: .17 Remington
- Compatible Bullet Diameter: .172 in (4.37 mm)
- Mounting Interface: 7/8"-14 thread pitch
- Shell Holder Requirement: Hornady Shell Holder #16 (sold separately)
- Weight: Approximately 280 g to 350 g
- Power Requirements: None (manual operation)
Who is the Hornady 17 Remington Full Length Die for?
- Vermin hunters loading for bolt-action rifles — returns brass fired in bolt-action field rifles back to precise SAAMI dimensions to guarantee smooth chambering and feeding, sizing the body while neck-sizing for projectiles measuring .172 in (4.37 mm) in diameter.
- Reloaders processing mixed-brass lots — restores case headspace and dimensions uniformly across varying headstamps via standard 7/8"-14 threaded reloading presses, ensuring consistent ammunition batches for field use.
Less suitable for: Handloaders who exclusively fire factory-matched cases out of a single, custom tight-chambered rifle and seek to maximize brass lifespan without working the case body, who are better served by a dedicated neck-sizing die or match-grade bushing die. It is also completely unsuitable for other small-bore cartridges such as .17 Hornet or .17 Remington Fireball, and attempting to operate this die without high-pressure bottleneck case lubrication will cause an immediate stuck case.
| SKU | HN42589LP |
| Model # | 046201 |
| Brand | Hornady |
| Shipping Weight | 1.0000kg |