The Hornady Custom Grade™ Full Length Sizing Die (MPN: 046516) is a single-station pistol reloading tool engineered to resize fired brass cases to factory SAAMI dimensions while extracting spent boxer primers. Machined with standard 7/8"-14 mounting threads, the die integrates into major single-stage and progressive reloading presses. Built for high-volume pistol brass preparation, it eliminates case lubrication requirements on clean brass through an internal polished Titanium Nitride (TiN) sizing ring.

Key Features

  • Titanium Nitride (TiN) Sizing Ring: High-hardness internal ring resizes brass without case lube, preventing case sticking, oil dents, and surface scratching on clean brass.
  • Full-Length Resizing & Decapping: Restores fired cartridge cases back to factory SAAMI external dimensions while punching out spent boxer primers in a single stroke.
  • Zip Spindle™ System: Features threaded micro-grooves and a collet lock to allow fine incremental height adjustments or rapid spindle movement, locking securely to eliminate slippage during decapping.
  • Sure-Loc™ Lock Ring: Applies radial friction through a split-clamp design with wrench flats, locking the die securely into the press without damaging the 7/8"-14 threads.

Product Specifications

  • Calibre Compatibility: 9mm Luger (9x19mm Parabellum) and 9x21mm
  • Bullet Diameter Sizing: .355"
  • Mounting Thread: Industry-standard 7/8"-14
  • Primary Material: Steel body with polished Titanium Nitride (TiN) interior ring
  • Form Factor Height: Approximately 110 mm to 120 mm
  • Packaged Weight: Approximately 0.35 kg to 0.45 kg (0.8 lb to 1.0 lb)
  • Operation: Manual reloading press operation (non-powered)

Who is the Hornady 9mm Luger Full Length Die for?

  • Category H licensed sport and target shooters — Mounts via industry-standard 7/8"-14 threads to reliably resize brass cases to SAAMI specifications for .355" diameter projectiles across high-round-count 9mm Luger and 9x21mm handguns.
  • Handloaders seeking unlubricated pistol brass processing — Features an integrated Titanium Nitride (TiN) ring that sizes 9mm pistol cases down to SAAMI specifications for .355" bullets without the need for case lubrication.

Less suitable for: Handloaders processing .380 ACP, .38 Special, or .357 Magnum cartridges (which require dedicated calibre-specific dies), or those decapping steel-cased and Berdan-primed surplus ammunition, which requires a heavy-duty universal decapping die or dedicated Berdan decapping tool to prevent decapping pin breakage.

SKU HN42630LP
Model # 046516
Brand Hornady
Shipping Weight 1.0000kg

What our Customers are Saying