The Hornady Custom Grade New Dimension 204 Ruger Full Length Sizer Die (SKU: 046590) is a single, precision-machined steel reloading die manufactured in the United States. Designed for handloaders working with high-velocity .204 Ruger (5.2 mm) bottleneck cartridge cases, this die deprimes spent primers, resizes the entire case body, and pushes the shoulder back to SAAMI factory specifications in a single press stroke. It features standard 7/8"-14 threading to integrate directly into conventional single-stage, turret, and progressive reloading presses. As a purely mechanical reloading component, it requires no electrical power, and it is an unregulated non-controlled accessory within Australia.

Key Features

  • Full-Length Resizing & Decapping: Restores fired cartridge brass to factory dimensions while punching out spent primers in one stroke.
  • Zip Spindle™ System: Uses a collet with fine incremental threads on the spindle shaft to eliminate slippage and provide precise decapping depth adjustments.
  • Elliptical Expander: Features a smoothly polished, elliptical expander ball that glides through the case neck to significantly minimise friction and neck stretching.
  • Hardened Decapping Pin: Constructed from hardened steel to reliably remove spent primers without bending or breaking.
  • Sure-Loc™ Lock Ring: Split-ring design with wrench flats clamps firmly onto the 7/8"-14 threads without marring the steel.

Specifications

  • Calibre Compatibility: .204 Ruger (5.2 mm bottleneck cases)
  • Thread Interface: Industry-standard 7/8"-14 thread
  • Die Profile Length: Approximately 11–12 cm
  • Material: Precision-machined steel
  • Country of Origin: United States
  • Power Requirements: None (manual mechanical operation)

Who is the Hornady 204 Ruger Full Length Die for?

  • Handloaders shooting the 204 Ruger cartridge — Needs a full length rifle sizing die built with an industry-standard 7/8"-14 thread to reform fired .204 Ruger bottleneck cases back to factory dimensions on standard reloading presses.
  • Varmint hunters reloading brass fired across multiple rifles — Requires complete full-length resizing to return .204 Ruger brass to factory SAAMI headspace and body dimensions, ensuring reliable chambering across different rifle chambers.

Less suitable for: Handloaders seeking maximum brass work-life for cases fired strictly out of a single bolt-action rifle chamber, who should use a dedicated neck sizing die instead; or reloaders working with non-.204 Ruger calibres, as running .20 Tactical or .223 Remington brass will cause dimensional damage to the brass and die. Bottleneck case sizing with this steel die also strictly requires case lubrication to prevent stuck cases.

SKU HN42638LP
Model # 046590
Brand Hornady
Shipping Weight 1.0000kg

What our Customers are Saying