Is the included Hornady Lock-N-Load Case Prep Trio fully compatible with Australian 240V mains power and local safety standards?

Yes, the Case Prep Trio features a dual-voltage power supply supporting 110V to 240V at 50/60 Hz. Australian retail stock is supplied with the appropriate local plug adaptors and complies with relevant electrical safety regulations for domestic reloading benches.

Can the Headspace Comparator Kit and Bullet Comparator handle all of my bottleneck rifle and straight-wall cartridges?

The bullet comparator set includes 14 precision inserts fitting calibres from .172 to .458, and the headspace comparator includes 5 bushing sizes ranging from A-.330 to E-.420 for bottleneck cartridges. However, please note that the headspace comparator bushings are not designed to be used with straight-wall cases.

How many rounds per session can I comfortably process with the Cam-Lock Case Trimmer and Case Prep Trio before needing heavy-duty commercial gear?

This precision accessory kit is engineered for meticulous handloaders producing batches of roughly 50 to 200 rounds per session, focusing on low round-to-round variation. High-volume commercial processing exceeding 200 rounds per session or bulk service-rifle prep is better suited to dedicated motorized auto-trimmers.

What maintenance do the steel dial caliper and carbon steel measurement components require in humid or coastal Australian conditions?

Because the kit includes precision-machined carbon steel components and sensitive dial instruments accurate to 0.001 inches, you should store them in a dry, climate-controlled indoor environment. Applying a light coat of gun oil or rust inhibitor after use will prevent surface corrosion caused by humidity or outback moisture.

Reloading Accessory Kit - Hornady 095150

The Hornady Lock-N-Load Precision Reloaders Kit (Model 095150) is an all-in-one suite of measurement, alignment, and case preparation tools engineered to minimize round-to-round ballistic variation. Packaged at a total kit weight of approximately 5.22 kg to 5.8 kg, this kit enables handloaders to map rifle chambers, trim brass to length, verify shoulder set-back, and detect bullet runout. The bundled Hornady Lock-N-Load Case Prep Trio serves as the kit's sole powered unit, utilizing a 110V/220–240V multi-voltage DC motor, while all accompanying diagnostic tools operate mechanically for direct benchtop control.

Key Features

Bullet Runout Correction: The Ammunition Concentricity Tool measures cartridge runout via dial indicator and features an integrated thumb-screw adjustment to straighten bullet seating alignment.
Chamber Mapping: The Lock-N-Load Curved O.A.L. Gauge fits both bolt-action and AR-15 platforms to measure exact bullet distance to the rifling when paired with caliber-specific modified cases.
Base-to-Ogive Seating Verification: The Bullet Comparator body attaches to the included 6-inch steel dial caliper, utilizing 14 interchangeable inserts to measure bullets from .172 up to .458 at the ogive rather than the tip.
Headspace Management: The Headspace Comparator kit utilizes 5 interchangeable bushing sizes to measure shoulder set-back before and after sizing, preventing over-bumping and lengthening brass life.
Powered Case Prep: The bench-mounted Case Prep Trio features three motorized 8-32 threaded stations running simultaneously, bundled with inside chamfer and outside deburr heads.
Micro-Adjustable Trimming: The manual Cam-Lock Case Trimmer delivers case length cuts in 0.001-inch adjustments and includes a 1/4-inch hex power adapter for drill attachment.

Specifications

Model Number: 095150
Total Kit Weight: 5.22 kg to 5.8 kg (11.5–12.8 lbs)
Package Dimensions: 47.8 cm × 31.2 cm × 16.8 cm (18.8″ L × 12.3″ W × 6.6″ H)
Measurement Accuracy: 6-inch steel dial caliper accurate to 0.001″
Bullet Comparator Sizes (14 inserts): .172, .204, .224/5.56mm, .243/6mm, .257, .264/6.5mm, .277, .284/7mm, .308, .338, .358, .375, .416, and .458
Headspace Bushing Sizes (5 bushings): A-.330″, B-.350″, C-.375″, D-.400″, and E-.420″
Trimmer Compatibility: Handles case bodies up to .50 calibre (requires caliber-specific shell holders and pilots)
Power Supply: Dual-voltage 110V/220–240V (50/60 Hz) DC motor power supply for the Case Prep Trio

Who is the Hornady Lock N Load Precision Reloaders Accessory Kit for?

Long-range rifle shooters reloading precision bottleneck cartridges — requires precise brass sizing control, which this reloading precision measurement accessory kit achieves using 5 headspace comparator bushings (A-.330″, B-.350″, C-.375″, D-.400″, and E-.420″) mounted to a steel dial caliper accurate to 0.001″ to measure shoulder bump across calibers ranging from .17 up to belted magnums.
Competitive target shooters handloading low-runout ammunition batches — requires absolute bullet-to-bore alignment, which this reloading accessory kit manages by pairing an Ammunition Concentricity Tool with a bullet comparator set containing 14 inserts from .172 to .458 to correct runout and establish uniform base-to-ogive seating depths.

Less suitable for: Handloaders processing straight-wall cartridges or high-volume reloaders exceeding batch thresholds of 200 rounds per session, who require continuous press-mounted electric commercial auto-trimmers rather than manual trimmers and bottleneck-specific headspace gauges.

SKU	HN42673LP
Model #	095150
Brand	Hornady
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Pro-shot 1ps-38-17 Stainless Steel Rifle Cleaning

$122.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Hornady 085521 Iron Press Kit Auto Prime Cast Iron

$1,550.95

Hornady 095100 Lock-N-Load Ap Press 5-Station Ezje

$1,430.95

Frankford Fa-Fx10prp Progressive Reloading Press C

$1,983.95

Redding 84242 7mm Tcu Deluxe Die Set 3-Die Precisi

$416.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Hornady 095150 Precision Reloaders Kit Case Prep Tools

Secure Payment Methods