Hornady 391915 Neck Turn Mandrel 25 Caliber Reloading Tool
Secure Payment Methods
Calculate Shipping
The Hornady Neck Turn Tool Mandrel .25 Caliber (Model: 391915) is a precision-ground tool steel component designed to internally support and align brass cartridge case necks during the outside neck-turning process. Machined specifically for .25-calibre rifle cases that shoot .257" projectiles, this passive mechanical reloading accessory guides the cartridge neck rigidly against the cutter of the Hornady Neck Turning Tool (SKU: 041224). By establishing a stable internal surface, it allows handloaders to cut away high spots, eliminate internal "doughnuts", and achieve uniform neck wall thickness across their brass batches.
Key Features
- Precision Calibre Support: Precision-ground diameter of 0.2545" to 0.255" provides the necessary slip-fit support inside expanded .25-calibre case necks to prevent deformation under cutter pressure.
- Run-Out and Tension Uniformity: Aligns the case axis directly against the cutting tool to eliminate neck thickness variances, producing consistent bullet release tension and reduced projectile run-out.
- Dedicated Hornady Fitment: Engineered specifically to mount into the Hornady Neck Turning Tool cutter body carriage for secure alignment during hand or motorized turning.
- Durable Steel Construction: Manufactured from hardened tool steel weighing 0.06 lb (~27 grams) to withstand repeated case cycling when properly lubricated.
Specifications
- Brand: Hornady
- Model: 391915
- Product Type: Neck turning tool mandrel
- Calibre Compatibility: .25 Calibre (.257" projectile diameter)
- Mandrel Diameter: 0.2545" to 0.255"
- Tool Weight: Approximately 0.06 lb (~27 g)
- Tool Interface: Hornady Neck Turning Tool (SKU: 041224)
- Power Requirements: None (manual/mechanical tool)
Who is the Hornady Mandrel 25 Cal. for?
- Precision handloaders — requires the 0.2545" to 0.255" ground diameter to internally guide and true case necks when prepping .25-06 Remington, .257 Roberts, or .257 Weatherby Magnum brass on a Hornady neck turning tool mandrel.
- Long-range hunters — relies on the 0.255" diameter internal support to shave uneven neck walls down to uniform tolerances, eliminating bullet run-out and flyers on .25-calibre hunting cartridges.
Less suitable for: Handloaders prepping non-.25-calibre cases such as .243/6mm or 6.5mm/.264, or those using alternative neck-turning bodies with non-Hornady mounting geometries; these setups require calibre-specific mandrels (.243 or 6.5mm) or brand-dedicated turning mandrels built for competitor lathe platforms.
| SKU | HN43090LP |
| Model # | 391915 |
| Brand | Hornady |
| Shipping Weight | 1.0000kg |