Will these Hornady Lock-N-Load bushings fit my standard 7/8"-14 reloading dies?

Yes, these bushings feature an internal 7/8"-14 thread interface designed specifically to accommodate all standard reloading dies from major brands like Hornady, RCBS, Redding, and Lee. They allow you to rapidly twist your dies in and out of the press with a simple fractional turn.

Are these 44093 bushings compatible with non-Hornady reloading presses?

They are a direct drop-in fit for all Hornady Lock-N-Load presses, including the Classic single-stage and AP progressive models. They can also be used on competitor presses like RCBS or Redding only if the press features a removable 1-1/4"-12 threaded top adapter and is fitted with a Hornady Lock-N-Load conversion bushing.

Do I need to readjust my die settings every time I remove them from the press?

No, that is the primary benefit of the Lock-N-Load system. Once your die is dialed into position and locked securely into the bushing using a lock ring, your depth and crimp settings are permanently preserved for future reloading sessions.

Can I use these bushings with oversized magnum or .50 BMG dies?

No, these bushings are built exclusively for standard 7/8"-14 threaded dies and will not accommodate large-format or oversized magnum dies requiring 1-1/4"-12 or 1-1/2"-12 threads.

What maintenance is required to keep these solid steel bushings functioning smoothly on my bench?

Being solid machined steel with an integrated O-ring damper, they require very little upkeep. A light application of gun oil or rust preventative should be periodically applied to the exterior threads and lugs to prevent surface corrosion, especially in humid Australian garage or shed environments.

Are there any electrical compliance certifications or SAA/RCM approvals needed for this product in Australia?

No electrical compliance or SAA/RCM approvals are required. This Hornady 3-pack is a strictly mechanical handloading hardware accessory containing zero electrical components, meaning 240V regulations and plug standards do not apply.

Reloading Die Bushings - Hornady 44093

The Hornady Lock-N-Load Positive Locking Press Die Bushings 3 Pack (MPN 44093) allows handloaders to rapidly insert and remove standard 7/8"-14 threaded reloading dies using a simple twist-in, twist-out motion. Constructed from solid machined steel with an integrated rubber O-ring damper, each bushing incorporates Hornady's patented 6-lug interrupted-thread design. Once a die is adjusted and locked into place inside the bushing, its exact sizing, expanding, seating, or crimping settings are preserved permanently between die changes, eliminating the need to readjust dies during caliber conversions.

Key Features

Rapid Die Changeovers: Allows dies to be mounted into and removed from compatible presses with a quick fractional turn.
Setting Retention: Preserves locked die adjustments so handloaders do not need to reset lock rings when switching between operations.
6-Lug Positive Lockup: Machined steel lugs and a rubber O-ring damper provide positive alignment and concentricity under full press operating pressure.
Broad Die Compatibility: Accepts any standard 7/8"-14 threaded reloading die from standard metric and imperial die manufacturers.

Specifications

Quantity: 3 bushings per pack
Internal Thread: Standard 7/8"-14 reloading die thread
External Interface: 6-lug interrupted-thread twist-lock insert
Material: Machined steel with rubber O-ring
Operating Mode: Fully mechanical reloading press accessory

Who is the Hornady Lock-N-Load Die Bushings 3-Pack for?

Multi-caliber precision handloaders — requires standard 7/8"-14 reloading die threads across sizing, expanding, seating, and crimping dies to enable rapid changeovers without losing exact depth and shoulder adjustments between steps.
Hornady Lock-N-Load press owners — uses the 3 bushings per pack to outfit multiple dies simultaneously for direct twist-lock operation in single-stage and progressive press setups.

Less suitable for: Handloaders utilizing large-format magnum dies with 1-1/4"-12 or 1-1/2"-12 thread patterns, or those operating reloading presses with non-removable, fixed 7/8"-14 thread sockets; these setups require dedicated large-format presses or direct-threaded non-bushing single-stage presses.

SKU	HN102533LP
Model #	44093
Brand	Hornady
Shipping Weight	0.1000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Sellier & Bellot 300 Winchester Magnum Unprimed Br

$57.95

A-zoom Perfect 45 Acp Striker Snap Caps Centering

Don't pay $22.95 $15.00 34.64% OFF

Grovtec Gtsw07 Machine Screw Fore End Swivel Set 1

$26.95

Recommended Products

Uncle Mikes Buttstock Shell Holder Rifle Flap Styl

$44.95

Lee Precision X-press Shell Holders Set 11pcs 9162

$82.95

Lee Precision 90992 Case Length Gauge And Shell Ho

$19.95

Rcbs Precise Machining 5 Station Shell Plate Reloa

$88.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Hornady 44093 Lock N Load Die Bushings 3 Pack Steel O-Ring

Secure Payment Methods