Will this 3-die set work with my standard Australian-market reloading press?

Yes, the Lee Precision 90541 features an industry-standard 7/8"-14 thread interface, making it fully compatible with all modern single-stage and turret presses from major brands commonly used in Australia, such as Lee, Hornady, RCBS, and Lyman.

Can I use these dies for the rimmed 7x57R Mauser cartridge found in some combination guns?

No, this Pacesetter die set is designed strictly for the rimless 7x57mm Mauser bottleneck rifle case and the included Lee #2 shell holder will not accommodate the rimmed 7x57R variant.

Do I need to lubricate my brass before resizing with this steel die set?

Yes, because these are precision-machined steel dies rather than carbide, case lubrication is strictly required prior to full-length sizing to prevent brass from getting permanently stuck inside the sizing die.

Why does this set include a Lee Factory Crimp Die instead of a standard roll crimp?

The Lee Factory Crimp Die applies a separate, uniform segmented crimp that ensures secure bullet retention under heavy recoil and rough bush transport, which is especially important for ammunition fed through vintage military Mauser magazines.

Does this mechanical reloading set require any electrical compliance or SAA/RCM certification for use in Australia?

No, as a purely mechanical set of steel reloading tools, it operates entirely by manual hand power and does not require 240V mains electricity, electrical plugs, or SAA/RCM regulatory marks.

What maintenance is required to protect these carbon steel dies in humid Australian workshop conditions?

To prevent surface rust during storage in outback or coastal environments, you should periodically wipe down the exterior and interior surfaces of the steel dies with a light coat of gun oil or rust preventative after use.

7x57 Mauser Die Set - Lee Precision 90541

The Lee Precision PaceSetter 3-Die Set for 7x57 Mauser (SKU: 90541) is a dedicated steel reloading kit engineered to resize, seat, and crimp 7x57mm Mauser (also known as 7mm Mauser or .275 Rigby) bottleneck rifle cartridges. Built from progressively honed steel, this mechanical three-die set restores fired brass to factory SAAMI and CIP external dimensions. It threads into standard reloading presses using industry-standard 7/8"-14 threads and includes a Full-Length Sizer Die, a Dead Length Bullet Seating Die, a Lee Factory Crimp Die (FCD), a Lee #2 shell holder, a powder dipper, load instructions, and a fitted storage box.

Key Features

Full-Length Resizing & Decapping: Returns fired brass cases to original SAAMI/CIP factory dimensions for reliable feeding across various rifle chambers while removing spent primers.
Dead Length Bullet Seating: Provides precise control over overall cartridge length and seating depth without imparting an unintentional roll crimp.
Lee Factory Crimp Die: Delivers a uniform, segmented crimp that secures projectiles firmly against recoil in magazine boxes and during field carry.
Standard Press Compatibility: Features 7/8"-14 thread interfaces, enabling direct installation into single-stage and turret presses without electrical or specialised power requirements.
Complete Setup: Ships with a calibre-matched Lee #2 shell holder and powder dipper in a fitted storage container measuring approximately 14.7 × 12.2 × 3.8 cm (5.8 × 4.8 × 1.5 in).

Specifications

Calibre: 7x57mm Mauser (7mm Mauser / .275 Rigby)
Die Thread Interface: 7/8"-14 thread
Material: Progressively honed steel
Included Shell Holder: Lee #2
Package Dimensions: Approx. 14.7 × 12.2 × 3.8 cm (5.8 × 4.8 × 1.5 in)
Package Weight: Approx. 575 g to 644 g (1.27 lbs to 1.42 lbs)
Power Requirements: Mechanical operation (no electrical input required)

Who is the Lee Precision PaceSetter 3-Die Set for 7x57 Mauser for?

Australian 7x57mm rifle hunters — requires a 7/8"-14 thread die set to restore fired 7x57mm Mauser brass to factory dimensions, ensuring smooth cycling through vintage military Mausers and modern sporting bolt-action rifles.
Field handloaders requiring bullet retention — relies on the dedicated Factory Crimp Die and matched Lee #2 shell holder to apply a segmented crimp that prevents projectile movement under heavy recoil in rifle magazines.

Less suitable for: Reloaders processing rimmed 7x57R Mauser brass or precision benchrest shooters requiring neck-only sizing, who should instead use a dedicated 7x57R-profile die set with a rimmed shell holder or a dedicated neck-sizing collet die.

SKU	LE102095LP
Model #	90541
Brand	Lee Precision
Shipping Weight	0.2000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Sellier & Bellot 300 Winchester Magnum Unprimed Br

$57.95

A-zoom Precision 357 Magnum Metal Snap Caps Solid

$53.95

A-zoom Perfect 45 Acp Striker Snap Caps Centering

Don't pay $22.95 $15.00 34.64% OFF

Recommended Products

Redding 80209 Die Set 45-70 Govt 3-Die Reloading K

$201.95

Redding 70000 Ultramag Reloading Press Cast Iron 4

$843.95

Lee Precision 90013 Load-All Ii Reloading Press 12

$190.95

Frankford Fa-Fx10prp Progressive Reloading Press C

$1,983.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Lee Precision 90541 Pacesetter 3-Die Set 7x57 Mauser Reloading Kit

Secure Payment Methods