The Lee Precision 90548 9mm Luger Carbide Full Length Sizing Die is a standalone reloading tool designed to decap spent primers and restore fired 9x19mm Parabellum cases to factory exterior dimensions. Engineered with a solid carbide sizing insert, it enables lube-free processing of straight-wall brass cases, eliminating case-cleaning steps during high-volume reloading cycles. Built with industry-standard 7/8"-14 threads, this mechanical die integrates directly into standard single-stage, turret, and progressive reloading presses.

Key Features

• Solid Carbide Sizing Ring: Polished carbide insert reshapes 9mm brass back to factory tolerances without requiring case lubrication, preventing base-ring marks on processed brass.
• Integrated Decapping Assembly: Deprimes spent boxer primers simultaneously during the full-length resizing stroke using a secure decapper clamp and pin setup.
• Standard Press Compatibility: Features standard 7/8"-14 threading to fit all standard modern reloading presses without requiring specialized adapters.
• Calibre-Specific Geometry: Engineered strictly for 9x19mm Luger (9mm Parabellum / 9mm NATO) cartridge cases, pairing with standard Lee #19 universal shellholders.

Product Specifications

• Product Type: Full-length pistol sizing and decapping die
• Calibre Compatibility: 9x19mm Parabellum / 9mm Luger / 9mm NATO
• Thread Interface: Standard 7/8"-14 thread
• Shellholder Requirement: Lee #19 universal shellholder (sold separately)
• Operation Mode: 100% mechanical manual reloading (dry / lube-free sizing)
• Shipping Weight: Approximately 200–250 g

Who is the Lee Precision 90548 9mm Luger Carbide Full Length Sizing Die for?

• IPSC, ISSF, and Service Pistol Competitors — Resizes high-volume 9x19mm Parabellum brass on single-stage or progressive presses without requiring case lubrication, eliminating pre-sizing and post-sizing cleaning stages.
• Category H and Pistol-Calibre Carbine Reloaders — Uses a standard 7/8"-14 thread interface to integrate directly as a dedicated station die or replacement decapping/sizing station for 9x19mm ammunition assembly.

Less suitable for: Reloading non-9x19mm calibres such as .380 ACP, 9x21mm, or .38 Super, which require calibre-matched sizing dies; mixed-range cases exhibiting severe base expansion or "Glock bulge" that fail chamber gauges, which require a specialized undersize sizing die or post-seating factory crimp die; or complete cartridge assembly from a single purchase, which requires expanding, bullet seating, and crimping dies.