What specific bullet type and calibre does the Lyman LY-M60244 mould cast, and what are its primary applications?

This mould casts a 255-grain, .44 calibre (.430" nominal diameter) Semi-Wadcutter (SWC) / Flat Nose Gas Check (FNGC) bullet, specifically Lyman's #429244 Ray Thompson design. It's primarily used for casting accurate, heavy-hitting bullets for .44 Special and .44 Remington Magnum revolvers and rifles, popular among target shooters, metallic silhouette competitors, and hunters.

What additional equipment is required to use the Lyman LY-M60244 mould, especially for Australian customers?

To operate this bare mould block, you will need Lyman Double Cavity Mould Handles, which are sold separately. Additionally, for sizing the cast bullets, a #421 Top Punch and appropriate sizing dies (e.g., .429, .430, or .431) are required, also sold separately. Australian users will also need a lead melting pot and proper safety gear for casting.

What are the key features of the Ray Thompson #429244 bullet design and the mould's construction that contribute to bullet quality?

The Ray Thompson #429244 design features a gas check base to prevent deformation under high-pressure loads, along with smaller lubrication grooves and a narrower front driving band for improved accuracy. The mould itself is machined from blued, heat-treated leaded steel with hardened steel alignment pins, ensuring precise bullet formation and minimal parting-line flash.

Are there any specific safety precautions or Australian compliance considerations when using this bullet casting mould?

This is a purely mechanical tool and has no electrical components, so Australian electrical certifications are not applicable. However, casting lead requires significant safety precautions: always cast in a well-ventilated outdoor or workshop environment to prevent lead exposure, and use appropriate personal protective equipment like gloves and respirators.

44 Cal Bullet Mould - Lyman LY-M60244

The Lyman Pistol Mould Double Cavity 44 Cal 255 Gr (MPN: LY-M60244) is a precision-engineered bullet casting mould designed for handloaders who demand absolute control over their ammunition. Based on the highly regarded Ray Thompson design (bullet design number #429244), this double-cavity mould allows shooters to cast two consistent, high-quality projectiles simultaneously. Machined from solid leaded steel and pre-treated with a blued finish, the mould blocks offer exceptional thermal stability and a minimal break-in period. This mechanical, non-electrical hand tool is built to withstand the rigorous temperatures of bullet casting, providing Australian reloaders with a reliable, long-term solution for producing custom .44 calibre ammunition.

Key Features:

Solid Steel Construction: Machined from premium leaded steel blocks and heat-treated to resist rust and ensure clean bullet release.
Hardened Steel Alignment Pins: Features precision-ground alignment pins that ensure the two mould halves align perfectly every time, eliminating parting-line flash on the cast projectiles.
Ray Thompson Design (#429244): Features a Gas Check base to prevent gas cutting and base deformation under high-pressure magnum velocities, alongside optimised lubrication grooves and a narrow front driving band for superior barrel alignment.
Double-Cavity Capacity: Casts two 255-grain bullets at the same time, significantly increasing production speed and efficiency at the casting bench.
Semi-Wadcutter Profile: The Flat Nose Gas Check (FNGC) Semi-Wadcutter profile delivers clean paper cuts for target shooting and excellent energy transfer for hunting applications.

Technical Specifications:

Manufacturer Part Number: LY-M60244 (cross-referenced under Lyman code LY-2660244)
Calibre: .44 Calibre (nominal bullet diameter of .430 inches)
Bullet Weight: 255 Grains (when cast using standard lead alloys)
Bullet Design Number: #429244
Bullet Profile: Semi-Wadcutter (SWC) / Flat Nose Gas Check (FNGC)
Mould Capacity: Double Cavity
Required Accessories: Requires Lyman Double Cavity Mould Handles (sold separately)
Sizing Compatibility: Designed to use a Lyman #421 Top Punch for bullet sizing. Recommended sizing dies include .429, .430, or .431 diameters depending on your firearm's specific bore dimensions.
Electrical Specification: Non-electrical mechanical tool (not subject to Australian SAA or RCM electrical certifications).

Who It Is For:

This Lyman bullet mould is specifically designed for Australian sport shooters, metallic silhouette competitors, and handgun hunters who reload for .44 Special and .44 Remington Magnum revolvers or lever-action rifles. It is an essential tool for handloaders who want to reduce ammunition costs while customising projectile hardness and sizing to match their firearm's specific bore. Because bullet casting involves molten lead and high temperatures, this product is intended for experienced reloaders who have a dedicated, well-ventilated outdoor or workshop casting area and use appropriate personal protective equipment.

SKU	LY38335LP
Model #	LY-M60244
Brand	Lyman
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Butler Creek Flip Fast Open Scope Cover 11 Eyepiec

$28.95

Butler Creek Fast Flip Open Scope Cover 01 Eyepiec

$28.95

Primos Pull Up Rope Nylon With Clasps Snap Hooks E

$20.95

Sportsmatch Rifle Scope Rings Mount Dovetails With

Don't pay $91.95 $77.95 15.23% OFF

Recommended Products

Hornady 7mm Remington Magnum Neck Sizing Die 04605

$87.95

Lyman Ly-M50640 Bullet Mould Double Cavity 44mag 2

$291.95

Lyman Ly-Im Ingot Mould 4-Cavity Cast Iron 1lb Cap

$110.95

Lyman Ly-M41114 Bullet Casting Mould Single Cavity

$291.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Lyman Ly-M60244 Pistol Mould Double Cavity 44 Cal 255 Gr Semi-Wadcutter

Secure Payment Methods