This two-die set is intended for reloading bottleneck cases and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes, and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full-length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated.

For shooters who demand reloads equal to the quality of their guns.

KEY FEATURES

• Each RCBS Die is made from case hardened steel. The inside surfaces of all dies are precision-drilled and reamed to the same exacting standards as the finest gun mechanisms.
• Full-Length Sizer Dies for bottleneck cases have vents to prevent case damage caused by trapped air and excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full-length sizing.
• Dies are properly hardened and hand polished. This special RCBS finishing produces a die that will withstand years and years of the abrasive type of wear caused by case sizing.
• All RCBS Seater Dies have a built-in roll or taper crimper as appropriate for the particular caliber. To seat bullets without crimping, simply unscrew the die until the crimp ring no longer engages the case mouth.
• Large, easy-to-adjust hex lock rings utilize hex head set screws. Unless otherwise noted, all RCBS Precisioneered Dies have the standard 7/8"-14 thread.
• Dies are packaged in stackable, plastic storage boxes specially designed to protect the dies in shipping. Also included is a loading data label.