The RCBS 3-Die Carbide Taper Crimp Set 9mm Makarov (Model R23015) is a high-precision reloading toolset designed for reloading straight-walled 9x18mm Makarov pistol cartridges. Machined from case-hardened steel and weighing between 0.66 kg and 0.70 kg (with its protective grey storage box), this three-die set is compatible with standard single-stage and turret reloading presses featuring a 7/8"-14 thread pitch. By integrating a polished carbide sizing ring, this set allows handloaders to resize and deprime brass cases cleanly without the need for case lubrication.

Key Features

• Lubrication-Free Sizing: The sizer die incorporates a highly polished carbide sizing ring that eliminates the need for case lubricant, preventing messy buildup and streamlining the reloading sequence.
• Three-Step Reloading Sequence: Includes a Carbide Sizer Die with an integrated decapping unit, an Expander Die to open and flare the case mouth, and a Bullet Seating Die with an integrated taper crimp.
• Dedicated Taper Crimp: The seating die applies a precise taper crimp, removing the case flare while preserving a sharp case mouth edge to ensure reliable headspacing and chambering in semi-automatic firearms.
• Standard Thread Compatibility: Built with a universal 7/8"-14 thread interface to ensure seamless compatibility with most standard reloading presses.

Specifications

• Calibre Compatibility: 9x18mm Makarov (9mm Makarov)
• Die Thread Pitch: 7/8"-14
• Set Composition: Carbide Sizer Die (with decapping unit), Expander Die, Bullet Seating/Taper Crimp Die
• Material: Case-hardened steel with highly polished carbide sizing ring insert
• Package Dimensions: 15.1 cm L × 12.1 cm W × 4.4 cm H (5.95" L × 4.75" W × 1.75" H)
• Weight: 0.66 kg to 0.70 kg (including standard grey storage box)

Who is the Rcbs 9mm Makarov Carbide Taper Crimp 3 Die Set for?

• Target shooters using military surplus handguns — requires the precise 7/8"-14 thread pitch of this 9mm Makarov reloading die set to securely mount the dies in standard reloading presses, allowing consistent volume loading for firearms like the Makarov PM or CZ 82.
• Collectors handloading specialized ammunition — requires this 9mm Makarov reloading die set to precisely expand case mouths to the required .365-inch bullet diameter, allowing the loader to assemble historically accurate cartridges that headspace correctly.

Less suitable for: reloading standard 9x19mm Luger cartridges, which utilize a smaller .355-inch bullet diameter and require a dedicated 9mm Luger carbide die set. Additionally, this set is not suitable for processing uncleaned, heavily soiled brass without a separate case-cleaning step, as abrasive grit can damage the polished carbide ring.