What specific calibres are supported by the RCBS Pro Chucker 5 Shell Plate #3?

This shell plate is cut specifically for Shell Plate #3 dimensions and supports a wide array of popular rifle and pistol cartridges, including .308 Winchester, .30-06 Springfield, 6.5 Creedmoor, .243 Winchester, and .45 ACP. It securely holds and precisely aligns up to five cases simultaneously for high-volume progressive reloading.

Can I use this shell plate on an RCBS Pro Chucker 7 press?

Yes, but with an important limitation. The Shell Plate #3 is natively designed for the 5-station Pro Chucker 5 press; if you wish to use it on a Pro Chucker 7 press, you must first install the Pro Chucker 5 to 7 Conversion Kit, which is sold separately.

Are there any electrical compliance requirements or Australian certifications needed to use this product?

No. Because the RCBS Pro Chucker 5 Shell Plate #3 is a purely mechanical, non-electrical firearm reloading accessory, electrical certifications like SAA/RCM, 240V compatibility, and Australian power plugs are completely not applicable. It can be legally imported and operated across all Australian states and territories.

How do I maintain and protect this steel shell plate during long-term storage in humid Australian conditions?

The shell plate is precision-machined from hardened steel to endure heavy reloading usage. To prevent rust and maintain its tight SAAMI tolerances during storage in workshop or outback environments, it should be kept clean, lightly oiled, and stored in a dry indoor area.

RCBS Shell Plate 3 - RCBS R88921

The RCBS Pro Chucker 5 Shell Plate #3 (Model R88921) is a precision-machined reloading accessory designed natively for the RCBS Pro Chucker 5 Auto Index Progressive Press. This mechanical plate is engineered to securely hold and precisely align cartridge cases through multiple progressive reloading steps, including sizing, depriming, priming, powder charging, bullet seating, and crimping. Constructed from hardened steel, it maintains the strict tolerances necessary for safe and highly consistent ammunition production.

Key Features

Hardened Steel Construction: Precision-machined to withstand high-volume reloading pressure while maintaining exact SAAMI tolerances over long-term use.
Consistent Headspacing: Engineered to capture exactly 0.125 inches of the case head, ensuring uniform and safe headspace dimensions for every reload.
Efficient Calibre Swapping: Allows progressive reloaders to change calibres rapidly without needing to readjust reloading dies between sessions.
Five-Station Capacity: Holds up to five cartridge cases simultaneously to support highly efficient, multi-stage progressive reloading operations.

Product Specifications

Model Number: 88921 (also referenced as R88921 or RC88921)
Press Compatibility: RCBS Pro Chucker 5 (compatible with the Pro Chucker 7 press only when utilizing the Pro Chucker 5 to 7 Conversion Kit, sold separately)
Station Capacity: 5 stations
Headspace Depth: 0.125 inches
Shipping Dimensions: Approximately 9.9 cm in width x 17.5 cm in length (3.9 inches x 6.9 inches)
Power Requirements: None (fully manual mechanical component)
Calibre Compatibility: Fits Shell Holder/Plate #3 dimensions, supporting .308 Winchester, .30-06 Springfield, .243 Winchester, 6.5 Creedmoor, .22-250 Remington, .25-06 Remington, 7mm-08 Remington, .270 Winchester, .280 Remington, .338 Federal, .358 Winchester, .45 ACP, and 9.3x62mm Mauser

Who is the Rcbs Pro Chucker 5 Shell Plate #3 for?

High-volume rifle and pistol handloaders — requires the exact 0.125 inches case head capture of this progressive press shell plate to maintain precise, SAAMI-compliant headspacing while processing large quantities of .308 Winchester, .30-06 Springfield, or 6.5 Creedmoor brass.
Progressive press operators running the RCBS Pro Chucker 5 — utilizes the native 5 stations capacity of this shell plate to feed, size, prime, charge, and seat projectiles across five separate indexing steps in a single press stroke.

Less suitable for: handloaders who require more than 5 stations to accommodate additional inline accessories, such as a dedicated powder checker and a separate bullet feeder simultaneously; these operators are better served by a 7-station progressive press and matching 7-station shell plate.

SKU	RC39271LP
Model #	R88921
Brand	Rcbs
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Allen 3d Leafy Omnitex Blind Fabric Mossy Oak Infi

$80.95

Primos Hunting Game Caller Randy Anderson Predator

$61.95

Allen Cascade Neoprene Gun Sling With Molded Ends

$56.95

Cci #300 Large Pistol Primers For Handgun Reloadin

Don't pay $24.95 $20.95 16.03% OFF

Recommended Products

Hornady 390548 Shell Holder #8 9mm Luger Steel Con

$15.95

Hornady 390560 Shell Holder #20 Steel 6.5x54 Mannl

$25.95

Hornady 390570 Shell Holder 30 Steel 44 Mag 7.5 Sw

$15.95

Hornady 390580 Shell Holder 40 For 50 Ae Steel

$25.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Rcbs R88921 Pro Chucker 5 Shell Plate 3 Steel Reloading Accessory

Secure Payment Methods