Will the Redding 10812 decapping rod fit my standard Redding Full-Length Sizing Die or Type-S Bushing Die?

No, the Model 10812 is built exclusively for Redding Competition Bushing Neck Sizing Dies and will not fit standard full-length sizing dies or Type-S bushing dies. Those alternative dies require different rod assemblies such as MPN #10711 or #11225.

Which specific rifle calibers are supported by this decapping rod assembly?

This model is optimized for short-to-medium action case lengths, accommodating small-to-medium rifle calibers including .204 Ruger, .221 Fireball, .222 Remington, .223 Remington, .22-250 Remington, 6mm GT, and 6.8mm Remington SPC.

Can I use the Redding 10812 with small-flash-hole brass like Lapua match cases?

It is designed for standard boxer-primed rifle flash holes of approximately 0.080 inches or 2.0 mm. For small flash holes measuring around 0.059 inches or 1.5 mm, you will need a dedicated small-flash-hole decapping component to prevent pin binding or breakage.

Do I need any firearm licences or permits to purchase this reloading component in Australia?

No permits or licence endorsements are required to purchase the Redding 10812 in Australia. It is classified as an unrestricted mechanical reloading accessory and is freely available to purchase online and in-store.

What should I do if the decapping pin on this rod assembly bends or breaks during use?

The Model 10812 features a replaceable pin design that holds a standard Redding decapping pin. If the pin is bent or broken due to foreign matter or off-center flash holes, you can independently replace just the pin rather than buying a whole new rod assembly.

Decapping Rod Assembly - Redding 10812

The Redding Competition Bushing Neck Sizing Die Decapping Rod Assembly (Model 10812) is a factory-original replacement component manufactured in the USA. Designed specifically for Redding Competition Bushing Neck Sizing Dies, this assembly deprimes spent primers during the neck-sizing stroke while maintaining proper alignment and concentricity for floating sizing bushings. Constructed from heat-treated steel to resist bending during repetitive benchtop reloading, it features a replaceable decapping pin configured for standard Boxer-primed cartridge cases.

Key Features

OEM Compatibility: Engineered specifically to match the internal dimensions, threading, and clearances of Redding Competition Bushing Neck Sizing Dies.
Floating Bushing Alignment: Maintains proper concentricity and clearance to allow the neck sizing bushing to self-center freely during the stroke.
Heat-Treated Steel Construction: Built from durable steel designed to withstand standard primer-pocket extraction forces without flexing.
Replaceable Pin Assembly: Houses an independent decapping pin designed for standard 0.080 in (2.0 mm) flash holes that can be swapped out if damaged.
Calibre Span: Sized for small-to-medium case lengths, including .204 Ruger, .221 Fireball, .222 Remington, .223 Remington, .22-250 Remington, 6mm GT, and 6.8mm Remington SPC.

Specifications

Manufacturer: Redding Reloading Equipment
Model / MPN: 10812
Country of Manufacture: USA
Compatible Calibres: .204 Ruger, .221 Fireball, .222 Remington, .223 Remington, .22-250 Remington, 6mm GT, 6.8mm Remington SPC
Compatible Die Series: Redding Competition Bushing Neck Sizing Dies exclusively
Flash Hole Compatibility: Standard Boxer flash holes (approx. 0.080 in / 2.0 mm)
Material: Heat-treated steel
Length: Approximately 70–80 mm
Weight: Approximately 20–30 g

Who is the Redding 10812 Competition Neck Die Decapping Rod for?

Precision handloaders reloading .204 Ruger through 6mm GT rifle cartridges — Requires a dedicated decapping rod tailored to short-to-medium case lengths that properly integrates with standard 0.080 in (2.0 mm) flash hole dimensions across cartridges ranging from .204 Ruger up to .22-250 Remington.
Reloaders utilizing Redding Competition Bushing Neck Sizing Dies on benchtop presses — Needs an OEM replacement assembly measuring approximately 70–80 mm in length that maintains correct floating bushing clearances inside competition-tier neck sizing dies.

Less suitable for: Reloaders operating standard full-length sizing dies, Type-S bushing dies, long-action cartridges (such as .25-06 or .30-06), or brass with small 0.059 in (1.5 mm) flash holes; these applications require dedicated Type-S decapping assemblies, long-rod competition variants, or small-flash-hole decapping pins.

SKU	RD102468LP
Model #	10812
Brand	Redding
Shipping Weight	0.1000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

A-zoom Precision 357 Magnum Metal Snap Caps Solid

$53.95

A-zoom Perfect 45 Acp Striker Snap Caps Centering

Don't pay $22.95 $15.00 34.64% OFF

Grovtec Gtsw07 Machine Screw Fore End Swivel Set 1

$26.95

Recommended Products

Lee Precision 90847 Carbide Sizer Factory Crimp Di

$39.95

Redding 84125 257 Roberts Deluxe 3-Die Set 7/8"-14

$231.95

Rcbs R39865 Neck Expander Plug 308 Calibre Reloadi

$50.95

Redding 32242 Decapping Rod Assembly 6mm Br 243 Ws

$44.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 10812 Competition Decapping Rod Assembly 223 Calibre

Secure Payment Methods