The Redding Competition Bushing Neck Sizing Die Decapping Rod Assembly (Part #10813) is a precision OEM replacement component designed specifically for Redding Competition Bushing Neck Sizing Dies. Built to service the .308 Winchester cartridge family and equivalent length cases, this hardened steel assembly deprimes spent brass while preserving the free-floating alignment critical to Redding's competitive neck-sizing process.

Key Features

• Dedicated Die Integration: Engineered specifically for Redding Competition Bushing Neck Sizing Dies to maintain correct internal concentricity and alignment during the decapping stroke.
• Hardened Steel Construction: Machined from durable steel to prevent flex and resist wear during high-volume reloading cycles.
• Modular Decapping Setup: Compatible with standard Redding decapping pin retainers as well as factory steel or carbide expander size buttons.
• Standard Flash Hole Sizing: Sized to cleanly clear standard Boxer primer flash holes measuring approximately 0.080 inches (2.0 mm).

Specifications

• Manufacturer Part Number: 10813 (RED-10813)
• Die Compatibility: Redding Competition Bushing Neck Sizing Dies exclusively
• Cartridge Compatibility: .308 Winchester case-length family (.243 Winchester, .260 Remington, 7mm-08 Remington, .257 Roberts, .308 Winchester, .300 WSM)
• Packaged Dimensions: 5.00 × 3.00 × 1.00 inches (12.7 × 7.62 × 2.54 cm)
• Packaged Weight: 0.30 lbs (approximately 136 g)
• Operation Type: Mechanical reloading tool component

Who is the Redding 10813 Competition Neck Die Decapping Rod for?

• Precision rifle handloaders — requires a dedicated decapping rod replacement engineered to fit the exact internal geometry of .308 Winchester family short-action cases featuring standard 2.015-inch baseline lengths.
• Competitive benchrest shooters — relies on maintaining strict die concentricity using Redding Competition Bushing Neck Sizing Dies, requiring an OEM replacement assembly that weighs 0.30 lbs packaged to fit standard 0.080-inch flash holes without altering neck tension alignment.

Less suitable for: Reloaders running shorter cases like 6mm BR (which require Part #10811), small-calibre designs like .223 Remington (requiring Part #10812), standard long-action .30-06-length cases (requiring Part #10814), magnum-length cases (requiring Part #10815), or anyone using standard full-length, Type-S Bushing, or Universal Decapping dies, which require different rod architecture assemblies.