Will the Redding Instant Indicator 27132 fit on my standard reloading press used in my Australian workshop?

Yes, the Redding Instant Indicator features a standard 7/8"-14 thread interface, making it fully compatible with all common single-stage reloading presses widely used in Australia, such as the RCBS Rock Chucker, Redding Boss or T-7, and Hornady Lock-N-Load presses.

How precise is the dial indicator for measuring shoulder bump on 6.5x55 SE brass?

The mechanical dial indicator provides precise readings down to 0.001" (one-thousandth of an inch) graduations. This high level of resolution allows handloaders to accurately measure shoulder setback and cartridge base-to-ogive consistency to tune their 6.5x55 Swedish Mauser ammunition.

Does this tool require any electrical certification or batteries for use in Australia?

No, the Redding Instant Indicator is an entirely mechanical precision metrology tool requiring no electrical power, batteries, or 240V mains wiring. Consequently, it is exempt from Australian SAA or RCM electrical regulatory certifications.

Can I use this specific model to check headspace on my .308 Win or 6.5 Creedmoor brass as well?

No, model 27132 is built strictly for the 6.5x55mm Swedish Mauser cartridge family and its corresponding bullet diameter. You cannot measure different cartridge families like .308 Winchester or 6.5 Creedmoor without using separate, calibre-specific Instant Indicator dies.

6.5x55mm Instant Indicator - Redding 27132

The Redding 6.5x55 Se Instant Indicator W/Dial Indicator (MPN: 27132) is a precision steel workshop tool designed to measure shoulder bump, headspace uniformity, and bullet seating depth directly in a reloading press. Operating as a comparative metrology system, it threads into standard press setups to provide fast, direct readouts on 6.5x55mm Swedish (6.5x55 SE) cases without requiring handheld calipers or separate modular collars.

Key Features

Direct In-Press Measurement: Mounts into any single-stage press via standard 7/8"-14 threading, allowing handloaders to check cases and completed rounds by raising the press ram.
Shoulder Bump & Headspace Verification: Compares the cartridge base-to-shoulder datum line against a fired case or zero gauge to accurately dial in sizing dies for consistent .001" to .002" shoulder setback.
Cartridge Base-to-Ogive (CBTO) Checking: Uses a 6.5mm (.264") bore diameter contact bushing to verify bullet seating depth consistency across finished batches.
Mechanical Operation: Fully mechanical design requires no batteries, mains power, or electrical certifications.
Complete Setup: Includes a calibre-specific steel die body, a dial indicator with 0.001" graduations, bore diameter contacts, a case head spacer/zeroing gauge, and instructions.

Specifications

Manufacturer Part Number (MPN): 27132
Calibre Compatibility: 6.5x55mm Swedish / 6.5x55 SE
Die Body Material: Precision machined steel
Thread Interface: Standard 7/8"-14 reloading press threads
Dial Resolution: 0.001" graduations
Mechanism: Pure mechanical dial indicator

Who is the Redding 6.5x55 SE Instant Indicator with Dial Indicator for?

Precision handloaders tuning ammunition for 6.5x55 Swedish Mauser rifles — Sets full-length sizing dies accurately by measuring relative shoulder setback on 6.5x55mm Swedish brass down to 0.001" dial graduations using a standard 7/8"-14 thread interface.
Competitive shooters sorting 6.5x55 brass by headspace and CBTO consistency — Allows high-speed comparative batch sorting of 6.5x55mm Swedish cartridges in standard 7/8"-14 presses with 0.001" resolution to verify base-to-ogive uniformity across finished rounds.

Less suitable for: Handloaders seeking to measure different cartridge families such as 6.5 Creedmoor, 6.5 PRC, or .308 Winchester, which exceed this tool's dedicated 6.5x55mm chamber geometry and require separate calibre-specific comparative dies or universal handheld caliper comparator bodies.

SKU	RD41493LP
Model #	27132
Brand	Redding
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Sellier & Bellot 300 Winchester Magnum Unprimed Br

$57.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Redding 85220 Taper Crimp Die For 32 Acp Reloading

$90.95

Lee Precision 90771 Pacesetter 3-Die Set 7x64 Bren

$98.95

Rcbs R18915 45 Auto Carbide Taper Crimp Die Set 7/

$288.95

Lyman Ly-Btn Brass Tapper Reloading Tool Nylon End

$26.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 27132 Instant Indicator Reloading Die 6.5x55mm Steel 0.001"

Secure Payment Methods