What components are included in the Redding 34256 Decapping Rod Assembly?

The Redding 34256 assembly comes complete with the decapping rod (Part #01034), a standard size and expander button (Part #39256) calibrated for 0.257-inch calibre, and a standard decapping pin (Part #01060). Weighing approximately 0.045 to 0.05 kg, it is ready to screw directly into your standard sizing die right out of the package.

Which specific rifle cartridges are compatible with the Redding 34256 assembly?

This assembly is engineered for standard .25 calibre cartridges utilising a 0.257-inch bullet diameter. It is specifically designed for conventional sizing dies chambered in .25-06 Remington, .25-06 Remington Improved 40 degrees, .257 Roberts, .257 Roberts Improved 40 degrees, and .25-284 Winchester.

Will the Redding 34256 fit into my Redding Type-S Bushing Dies or Competition Dies?

No, this assembly is strictly built for conventional standard full-length and neck sizing dies. It is incompatible with Redding Type-S Bushing Dies and Competition Dies, which require dedicated Type-S decapping rods and separate neck bushings.

Does this decapping rod assembly require any Australian electrical or safety certifications?

No, electrical compliance such as 240V or SAA/RCM certification is entirely inapplicable. This is a purely mechanical, manual reloading tool requiring no electrical power or special firearm licensing constraints to import or operate on your Australian reloading bench.

What precautions should I take when using this assembly with Berdan-primed brass or small flash holes?

The standard decapping pin is designed exclusively for Boxer-primed centerfire brass featuring standard approximately 0.080-inch flash holes. Attempting to use this rod on Berdan-primed brass or military brass with small 1.5mm flash holes will result in a broken decapping pin unless replaced with a dedicated undersized pin.

How should I maintain the precision-machined steel components of the 34256 during humid Australian conditions?

Because the assembly is crafted from precision-machined steel, it benefits from a light application of gun oil or rust preventative when stored in humid outback or coastal environments. Regularly check the threaded interface and pin alignment to ensure consistent primer removal and smooth case neck expansion over years of heavy reloading use.

Redding 34256 Decapping Rod Assembly - Redding 34256

The Redding Decapping Rod Assembly (Part #34256) is a precision-machined steel replacement assembly designed for standard full-length and neck sizing dies. It performs dual operations in a single press stroke: knocking out spent Boxer primers from cartridge cases and expanding the case mouth to the required internal diameter for seating 0.257 in projectiles. Built to replace bent or damaged internal die components, this mechanical unit screws directly into the top of compatible standard Redding die bodies, allowing for precise pin depth adjustment and routine maintenance without requiring power or specialised bench tooling.

Key Features

Dual-Function Processing: Decaps spent primers and expands case necks to 0.257 in internal diameter during normal sizing strokes.
Complete Internal Assembly: Includes the threaded decapping rod (Part #01034), standard 0.257 in expander button (Part #39256), and standard decapping pin (Part #01060).
Direct Maintenance Replacement: Restores factory sizing and decapping performance in standard sizing dies chambered for .25-06 Remington, .25-06 Remington Improved 40°, .257 Roberts, .257 Roberts Improved 40°, and .25-284 Winchester.
Standard Flash Hole Interface: Engineered for Boxer-primed centerfire cartridge cases utilizing standard 0.080 in flash holes.

Specifications

Manufacturer Part Number: 34256
Calibre Compatibility: .25 Calibre / 0.257 in bullet diameter
Component Parts: Decapping Rod (#01034), Expander Button (#39256), Decapping Pin (#01060)
Weight: Approximately 0.045 kg to 0.05 kg (1.6 oz)
Material: Machined steel
Primer/Flash Hole Compatibility: Boxer primers with ~0.080 in flash holes
Power Requirements: None (manual reloading component)

Who is the Redding 34256 Decapping Rod Assembly for?

Reloaders of .25-06 Remington cartridges — requires a dedicated 0.257 in expander button to size case necks correctly and decap Boxer-primed brass using standard Redding reloading die decapping rods.
Reloaders of .257 Roberts cartridges — features a matched 0.257 in expander diameter to restore proper neck tension and spent primer extraction in conventional Redding sizing dies.

Less suitable for: Reloaders operating Redding Type-S Bushing Dies or Redding Competition Dies, which require dedicated bushing-style decapping rods without standard expander balls.

SKU	RD102361LP
Model #	34256
Brand	Redding
Shipping Weight	0.2000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

A-zoom Precision 357 Magnum Metal Snap Caps Solid

$53.95

A-zoom Perfect 45 Acp Striker Snap Caps Centering

Don't pay $22.95 $15.00 34.64% OFF

Grovtec Gtsw07 Machine Screw Fore End Swivel Set 1

$26.95

Recommended Products

Lee Precision 90847 Carbide Sizer Factory Crimp Di

$39.95

Redding 84125 257 Roberts Deluxe 3-Die Set 7/8"-14

$231.95

Rcbs R39865 Neck Expander Plug 308 Calibre Reloadi

$50.95

Redding 32242 Decapping Rod Assembly 6mm Br 243 Ws

$44.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 34256 Decapping Rod Assembly 25 Calibre Reloading Tool

Secure Payment Methods