The Redding .222 Remington Type S - Match Bushing Full Die Set (MPN 36109) is a precision two-die reloading system designed to deliver match-grade neck tension control, tight concentricity, and repeatable bullet seating depths. Engineered specifically for .222 Remington brass cases, this set combines a Type S Bushing Full-Length Sizing Die with a Competition Bullet Seating Die to minimise runout and brass fatigue during handloading.

Key Features

• Type S Bushing Full-Length Sizing Die: Resizes the entire case body while allowing interchangeable neck sizing bushings (sold separately, available in 0.001" increments) to regulate neck tension without overworking brass.
• Configurable Decapping Assembly: Includes a decapping rod assembly, expander button, and a decapping pin retainer for handloaders who size neck-turned brass without an internal expander.
• Competition Bullet Seating Die: Utilises an in-line sliding alignment sleeve that captures the case and .224" diameter bullet prior to seating to eliminate bullet runout.
• Micrometer Depth Adjustment: Features a top-mounted seating micrometer head calibrated in 0.001" graduations for precise bullet seating depth changes.
• Industry-Standard Interface: Machined from hardened steel with 7/8"-14 threads to mount directly onto standard single-stage and turret reloading presses.

Specifications

• Brand: Redding Reloading Equipment
• Manufacturer Part Number (MPN): 36109
• Calibre Compatibility: .222 Remington (.224" diameter projectiles)
• Thread Interface: Standard 7/8"-14 thread
• Shellholder Compatibility: Redding Standard Shellholder #10 or Competition Shellholder Set #11610 (sold separately)
• Weight: Approximately 0.6 kg to 0.7 kg boxed shipping weight
• Power Requirements: Manual mechanical operation

Who is the Redding 222 Rem Type S - Match Full Die Set for?

• Precision benchrest shooters handloading .222 Remington — requires micrometer-controlled bullet seating calibrated in 0.001" graduations and interchangeable neck bushings in 0.001" increments to achieve minimal runout and consistent neck tension with this Type S Match Bushing Full Die Set.
• Varmint hunters seeking match-grade accuracy in .222 Rem bolt-action rifles — relies on full-length case body resizing combined with the sliding alignment sleeve of the Competition Bullet Seating Die to maintain consistent feeding and tight projectile concentricity for the .222 Remington cartridge on standard 7/8"-14 thread presses.

Less suitable for: Handloaders reloading .223 Remington or other non-.222 Remington cartridges, who require calibre-specific die sets, or high-volume shooters who do not require 0.001" micrometer seating precision and are better served by standard non-bushing 2-die full-length steel sets.