The Redding 7mm Prc Type S Match Full Die Set (MPN 36936) is a precision two-die rifle reloading set engineered specifically for 7mm Precision Rifle Cartridge (7mm PRC / .284 in bullet diameter) ammunition. It pairs a Type S Bushing Full Length Resizing Die with a Competition Bullet Seating Die to deliver controlled case neck tension, reliable shoulder setback, and minimal bullet runout on standard 7/8"-14 threaded reloading presses.

Key Features:

• Precision Bushing Sizing: The Type S full-length die utilizes interchangeable neck sizing bushings (sold separately in .001" increments) that self-center on the case neck, allowing exact neck tension adjustments while full-length resizing the case body.
• Flexible Decapping Configuration: Includes an adjustable decapping rod assembly featuring both an expander button and a decapping pin retainer for reloaders sizing turned-neck brass without an expander ball.
• Micrometer Seating Precision: The Competition Bullet Seating Die incorporates a micrometer adjustment head graduated in .001" increments, paired with a tight-tolerance, floating bullet alignment sleeve and floating seating stem to hold the projectile and case strictly concentric during seating.
• Standard Press Interface: Built with standard 7/8"-14 threading to ensure mechanical compatibility across standard Australian reloading bench setups.

Specifications:

• Cartridge Compatibility: 7mm Precision Rifle Cartridge (7mm PRC) / .284 in (7.21 mm) bullet diameter
• Die Thread Interface: Standard 7/8"-14 threading
• Set Configuration: 2-Die Set (Type S Bushing Full Length Resizing Die #77936, Competition Bullet Seating Die #55936)
• Seating Adjustment: Micrometer adjustable head graduated in .001" increments
• Shellholder Requirement: Redding #6 standard shellholder (Part #11006) or Competition Shellholder #6 (Part #11606) (sold separately)
• Packaged Dimensions: Approximately 11.2 cm W × 4.45 cm H
• Weight: Approximately 0.68–0.80 kg
• Operation: Fully mechanical (non-electric)

Who is the Redding 7mm PRC Type S Match Full Die Set for?

• Long-range precision shooters loading 7mm PRC — Requires precise bullet depth control down to .001" increments using the micrometer competition seating die to optimize seating depth and muzzle velocity consistency for .284 in (7.21 mm) projectiles.
• PRS and F-Class competitors seeking tight bullet concentricity — Relies on this reloading rifle die set to eliminate bullet runout via a floating alignment sleeve and achieve exact neck tension using interchangeable bushings calibrated in .001" increments on standard 7/8"-14 presses.
• Extreme-range hunters handloading match ammunition — Uses this reloading rifle die set to full-length resize 7mm PRC brass back to factory dimensions while tuning bullet seating depth via .001" micrometer graduations for consistent field chambering and terminal accuracy.

Less suitable for: Reloaders chambering other .284 or magnum cartridges, as this die set is engineered exclusively for 7mm PRC cases and will not fit 7mm Remington Magnum, 7mm-08, or .300 PRC brass; shooters seeking standard-tolerance hunting rounds without .001" neck-bushing adjustments are better served by a standard non-bushing full-length two-die set, while reloaders sizing exclusively fire-formed brass for a single bolt-action rifle require a neck-only bushing die set.