What reloading press threading and shellholders are compatible with the Redding 56114 .243 Winchester die?

The Redding 56114 competition neck sizing die features standard 7/8"-14 reloading press threading, making it fully compatible with any standard single-stage or turret reloading press used in Australia. It requires a standard Redding Shellholder #1 (Part #11001) or a Competition Shellholder Set #1 (Part #11601) to securely hold your .243 Winchester cases during the sizing operation.

Does this neck sizing die come with sizing bushings and a sizing button included?

No, the sizing bushings are sold separately so you can select the precise size required for your specific brass wall thickness and desired neck tension. The die does not include a sizing button as standard, though optional carbide size button kits can be purchased separately if you prefer additional control over the inside neck diameter.

When should I transition from this neck sizing die to a full-length sizing die or body die?

This die is specifically designed to size only the neck of fire-formed cartridge cases for bolt-action rifles to minimise runout and extend brass life. However, once brass stretching causes bolt-lift to become tight after multiple firings, or if you intend to use the brass in semi-automatic, pump, or lever-action rifles, you must transition to a full-length sizing die or complement this neck die with a dedicated Redding Body Die.

Does this mechanical reloading die require any electrical compliance or SAA/RCM certification for use in Australia?

No electrical compliance or SAA/RCM certification is required for the Redding 56114. Because it is a purely mechanical, non-powered reloading tool, it does not consume electricity and is completely exempt from Australian 240V mains requirements and electrical safety standards.

Neck Sizing Die - Redding 56114

The Redding 56114 Competition Neck Sizing Die is a match-grade reloading tool engineered specifically for .243 Winchester cartridge cases. Designed to size only the neck of fire-formed brass while minimising runout, this die uses a free-floating, self-centring bushing system and an internal full-alignment sliding sleeve to guide and support the case before sizing begins. Handloaders can control neck tension precisely without overworking brass or requiring an expander ball, extending cartridge case life and preserving fire-formed case dimensions for dedicated bolt-action rifles.

Key Features

Full Alignment Sliding Sleeve: Features an internal sliding sleeve that fully captures and centres the cartridge case body before the neck enters the sizing bushing.
Precision Micrometer Adjustment: Features a top-mounted micrometer that allows handloaders to adjust the exact length of the case neck being sized in fine increments.
Self-Centring Bushing Design: Accommodates interchangeable neck sizing bushings (sold separately) that float freely within the die to eliminate concentricity errors and runout.
Floating Decapping Assembly: Retains linear decapping pin alignment without the need for an expander button, preventing neck stretching during the press downstroke.

Specifications

Calibre Compatibility: .243 Winchester (0.243 in / 6mm bullet diameter)
Die Type: Micrometer-adjustable competition bushing neck sizing die
Thread Interface: Standard 7/8"-14 reloading press threading
Shellholder Compatibility: Redding Shellholder #1 or Competition Shellholder Set #1
Unit Weight: ~0.499 kg
Packaging Dimensions: 152 mm (L) × 112 mm (W) × 41 mm (H)
Power Requirements: None (purely mechanical operation)

Who is the Redding Competition Bushing Neck Sizing Die for .243 Winchester for?

Precision benchrest shooters reloading for .243 Winchester bolt-action rifles — sizes only the neck of fire-formed brass to match a specific chamber using a micrometer-adjustable bushing system on standard 7/8"-14 threaded reloading presses.
Long-range competition shooters seeking to maximise case life and accuracy — controls neck tension on 0.243 in (6mm) diameter cases via interchangeable self-centring bushings, eliminating the need for an expander ball and minimising brass fatigue.

Less suitable for: Reloaders preparing brass for semi-automatic, pump-action, or lever-action rifles, brass fired across multiple different firearms, or cases where repeated firings cause tight bolt-lift due to shoulder and body growth; these conditions require a full-length sizing die or the addition of a dedicated body die to restore factory body dimensions and bump the shoulder back.

SKU	RD102257LP
Model #	56114
Brand	Redding
Shipping Weight	0.2000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Sellier & Bellot 300 Winchester Magnum Unprimed Br

$57.95

A-zoom Perfect 45 Acp Striker Snap Caps Centering

Don't pay $22.95 $15.00 34.64% OFF

Grovtec Gtsw07 Machine Screw Fore End Swivel Set 1

$26.95

Recommended Products

Redding 73246 Neck Sizing Bushing 0.246 Inch In He

$46.95

Redding 76310 Titanium Nitride Neck Sizing Bushing

$75.95

Redding 71132 Type S Neck Bushing Die 6.5x55 Swedi

$178.95

Rcbs 243 Win Neck Sizer Die Set - Polished And Hea

$146.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 56114 Competition Neck Sizing Die 243 Winchester Micrometer

Secure Payment Methods