Will this Redding 60420 die set work with standard .243 Winchester factory rifle chambers?

No, this elite die set is specifically engineered for the .243 Winchester Ackley Improved 40-degree wildcat chamber and will not correctly size brass for standard .243 Winchester, 243 WSSM, or 6mm Rem AI chambers. It requires 7/8"-14 threaded single-stage or turret presses and uses neck sizing bushings ranging from .266" to .274".

Are the neck sizing bushings included in the Redding Elite Bushing Die Set box?

No, the neck sizing bushings (.266" to .274" typical diameter) are sold separately and must be selected based on your specific brass neck-wall thickness. The 3-die set includes a Type S Full-Length Bushing Sizing Die, a Type S Neck Bushing Sizing Die, and a Competition Bullet Seating Die featuring a micrometer adjustable head calibrated in 0.001" increments.

Does this mechanical reloading die set require any electrical compliance or SAA/RCM certifications for Australian handloaders?

No electrical compliance or SAA/RCM certifications are required because this is a completely manual, bench-mounted mechanical reloading tool with no 240V mains power requirements. Additionally, because these are non-firearm mechanical reloading dies, they can be purchased and shipped directly across Australia without firearms registry tracking.

What maintenance is recommended to protect these steel dies during long-term storage in humid Australian coastal or outback environments?

To prevent rust and oxidation during storage, you should apply a light coat of rust-preventative gun oil or tool preservative to all exterior and interior steel surfaces after use. Keeping the dies stored in their original plastic 3-die storage box in a dry environment will ensure long-term precision and longevity.

243 Win AI Die Set - Redding 60420

The Redding 243 Win Ackley Improved 40 Degrees Type S - Elite Bushing Die Set (MPN: 60420) is a three-die precision reloading system built for reloading and seating ammunition for .243 Winchester Ackley Improved 40° chambers. Built on standard 7/8"-14 threaded die bodies, this manual bench-mounted set provides complete control over neck tension, case resizing, and bullet seating depth to minimise runout on 0.243" (6mm) diameter projectiles.

Key Features

Type S Full-Length Bushing Sizing Die: Resizes the full case body while using interchangeable neck bushings to control neck tension without overworking cartridge brass.
Type S Neck Bushing Sizing Die: Provides dedicated neck-only sizing using self-centering, free-floating bushings to maintain case concentricity.
Redding Competition Bullet Seating Die: Features a floating seating stem and guide sleeve paired with a micrometer-adjustable head calibrated in 0.001" increments for precise seating depth control.
Standard Threading: Machined with industry-standard 7/8"-14 threads to interface with standard single-stage and turret reloading presses.

Product Specifications

Calibre Compatibility: .243 Winchester Ackley Improved 40° (0.243" / 6mm bullet diameter)
Thread Interface: 7/8"-14
Micrometer Adjustment Increments: 0.001"
Recommended Bushing Range: .266" to .274" (bushings sold separately)
Shellholder Compatibility: Redding Shellholder #1 (#11001) or Competition Shellholder Set #1 (#11601)
Die Configuration: 3-Die Set (Full-Length Bushing Die, Neck Bushing Die, Competition Seating Die)
Power Requirements: Manual mechanical operation

Who is the Redding 243 Win Ackley Improved 40 Degrees Type S - Elite Bushing Die Set for?

Competitive long-range precision shooters — relies on the 0.001" micrometer adjustable head on the Competition Seating Die to dial exact bullet jump and achieve repeatable seating depths for the .243 Winchester Ackley Improved 40-degree cartridge.
Custom rifle handloaders — requires the interchangeable .266" to .274" bushing range across both full-length and neck-only sizing dies to set precise neck tension matched to specific brass neck-wall thicknesses.
Benchrest shooters — utilises the self-centering free-floating bushing design and 7/8"-14 threaded alignment sleeve to eliminate concentricity errors and minimise bullet runout.

Less suitable for: Handloaders loading standard .243 Winchester, 243 WSSM, or 6mm Rem AI chambers, or those assembling basic hunting ammunition where 0.001" micrometer seating adjustment and bushing neck sizing are unnecessary; standard 2-die non-bushing full-length sizing sets better fit standard-chamber utility loading.

SKU	RD41688LP
Model #	60420
Brand	Redding
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Pro-shot 1ps-38-17 Stainless Steel Rifle Cleaning

$122.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Redding 38415 Type S Match Neck Die Set 6.5 284 Wi

$501.95

Rcbs Sizer Expander Seater Die Set Roll Crimp Stra

$294.95

Redding 84135 270 Winchester Deluxe 3 Die Set For

$214.95

Lyman Ly-243 .243 Winchester Rifle 2 Die Set 7/8-1

$167.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 60420 Elite Bushing Die Set 243 Win Ai 3-Die

Secure Payment Methods