Will the Redding 71136 Type S Neck Die work on my standard Australian reloading press?

Yes, this die features standard 7/8"-14 reloading press threading, making it fully compatible with all common single-stage and turret presses used in Australia, such as the RCBS Rock Chucker, Hornady Lock-N-Load, and Redding presses. You will also need a Redding #6 Standard Shellholder (Part #11006) or a #6 Competition Shellholder (Part #11606) to secure your 7mm Rem Mag brass properly.

How often do I need to switch from this neck sizing die to a full-length sizing or body die?

Because the Redding 71136 only resizes the case neck and does not push back the shoulder or size the body, case bodies will eventually expand after 3 to 5 firings depending on your chamber pressures. Once you notice stiff or impossible bolt closure, you will need to transition to a Redding Type S Full Length Sizing Die (MPN: 77136) or use a dedicated body die. Neck-only sizing is strictly recommended for bolt-action rifles using fire-formed brass and should be avoided for semi-automatics.

Does the Redding 71136 die come with neck sizing bushings included?

No, the sizing bushings are sold separately to allow you to precisely tune your neck tension using .001" increments. For the 7mm Remington Magnum (.284" bullet diameter), the recommended bushing size range is approximately .305" to .313", depending on your brass wall thickness and whether you turn your necks.

Are there any electrical compliance requirements or Australian certifications needed for this reloading die?

No electrical compliance, 240V mains compatibility, SAA approvals, or RCM markings are required for the Redding 71136. It is a purely mechanical, heat-treated steel reloading tool designed for workshop and indoor bench use.

7mm Rem Mag Neck Die - Redding 71136

The Redding Type S – Bushing Neck Sizing Die (MPN: 71136) is a precision reloading tool designed for 7mm Remington Magnum cartridges (.284" bullet diameter). Engineered for single-rifle bolt-action setups, this die sizes fire-formed cartridge case necks while preserving the fire-formed dimensions of the case body and shoulder. By utilizing freely floating, interchangeable sizing bushings (sold separately, typically ranging from .305" to .313" for this calibre), the die self-centres on the case neck axis to minimise runout, maintain concentricity, and eliminate overworking of brass.

Key Features

Interchangeable Bushing System: Accepts standard Redding steel or titanium nitride (TiN) bushings adjustable in .001" increments to establish exact neck tension.
Self-Centring Alignment: The freely floating bushing design self-aligns with the cartridge neck axis during the sizing stroke to optimise concentricity.
Dual Decapping Modes: Includes a standard size expander button for commercial unturned brass as well as a decapping pin retainer for turned match brass, allowing decapping without drawing an expander through the neck.
Selective Sizing Depth: The adjustable decapping rod assembly enables handloaders to size the complete neck or only a partial length of the neck.
Standard Press Integration: Features industry-standard 7/8"-14 die threading with an included locking ring to fit standard single-stage and turret reloading presses.

Product Specifications

Calibre: 7mm Remington Magnum (.284" bullet diameter)
Thread Standard: 7/8"-14 TPI
Shellholder Compatibility: Redding #6 Standard Shellholder (Part #11006) or #6 Competition Shellholders (Part #11606)
Bushing Range Compatibility: .305" to .313" diameter bushings (sold separately)
Included Components: Die body, 7/8"-14 lock ring, decapping rod assembly, expander button, decapping pin retainer
Packaged Dimensions: 11.2 cm × 4.4 cm × 4.4 cm (approx. 4.4" × 1.75" × 1.75")
Packaged Weight: Approximately 250 g to 300 g

Who is the Redding 7mm Rem Mag Type S - Neck Die for?

Long-range precision handloaders — requires exact neck tension control for .284" diameter projectiles using interchangeable bushings in .001" increments to extend brass life and minimise runout on fire-formed 7mm Remington Magnum cases.
Benchrest competitors — handloading fire-formed 7mm Remington Magnum brass on standard 7/8"-14 threaded presses who require the ability to decap and size turned case necks without dragging an expander ball through the neck.

Less suitable for: Handloaders processing brass that has reached 3 to 5 firings where body expansion and shoulder migration cause stiff bolt closure, or shooters using semi-automatic, pump, or lever-action actions; these conditions require switching to a full-length sizing die or dedicated body die to bump the shoulder and resize the case body.

SKU	RD41726LP
Model #	71136
Brand	Redding
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Pro-shot 1ps-38-17 Stainless Steel Rifle Cleaning

$122.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Redding 81340 7x64 Brenneke Neck Sizing Die 7/8"-1

$175.95

Redding 78136 Type S Neck Die Set For 7mm Remingto

$302.95

Redding 81169r Neck Sizing Die 375 H&H Magnum Relo

$109.95

Redding Type S Elite Bushing Die Set 60443 6mm Cre

$664.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 71136 Type S Neck Die 7mm Rem Mag Bushing

Secure Payment Methods